TL-WR1043ND Wireless N Gigabit Router
¾Enable WMM - WMM function can guarantee the packets with high- priority messages being transmitted preferentially. It is strongly recommended enabled.
¾Enable Short GI - This function is recommended for it will increase the data capacity by reducing the guard interval time.
¾Enabled AP Isolation - This function can isolate wireless stations on your network from each other. Wireless devices will be able to communicate with the Router but not with each other. To use this function, check this box. AP Isolation is disabled by default.
)Note:
If you are not familiar with the setting items in this page, it's strongly recommended to keep the provided default values; otherwise it may result in lower wireless network performance.
4.6.5Wireless Statistics
Choose menu “Wireless→Wireless Statistics”, and then you can see the MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station.
Figure 4-23 The Router attached wireless stations
¾MAC Address - The connected wireless station's MAC address
¾Current Status - The connected wireless station's running status, one of STA-AUTH /
Disconnected
¾Received Packets - Packets received by the station
¾Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return to the previous page.
)Note:
This page will be refreshed automatically every 5 seconds.
