TP-Link TL-WR1043ND manual II. By PIN

TL-WR1043NDWireless N Gigabit Router

Step 4. Wait for a while until the next screen appears. Click Finish to complete the QSS configuration.

The QSS Configuration Screen of Wireless Adapter

II.By PIN

If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods.

Method One: Enter the PIN into my Router

Step 1. Keep the default QSS Status as Enabled and click the Add device button in Figure 4-2,then the following screen will appear.

Step 2. Choose Enter the new device's PIN and enter the PIN code of the wireless adapter in the field behind PIN in the above figure. Then click Connect.

)Note:

The PIN code of the adapter is always displayed on the QSS configuration screen

-22-