TP-Link manual Basic Security, TL-WR1043ND Wireless N Gigabit Router

TL-WR1043NDWireless N Gigabit Router

4.10 Security

Figure 4-52 The Security menu

There are four submenus under the Security menu as shown in Figure 4-52:Basic Security, Advanced Security, Local Management and Remote Management. Click any of them, and you will be able to configure the corresponding function.

4.10.1 Basic Security

Choose menu “Security → Basic Security”, and then you can configure the basic security in the screen as shown in Figure 4-53.

Figure 4-53 Basic Security

¾Firewall - A firewall protects your network from the outside world. Here you can enable or disable the Router’s firewall.

•SPI Firewall - SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking more state per session. It validates that the traffic passing through the session conforms to the protocol. SPI Firewall is enabled by factory default. If you want all the computers on the LAN exposed to the outside world, you can disable it.

-65-