TP-Link TL-WR1043ND Rules List, To add/modify a Bandwidth Control rule, follow the steps below

TL-WR1043NDWireless N Gigabit Router

4.14.2 Rules List

Choose menu “Bandwidth Control → Rules List”, and then you can view and configure the Bandwidth Control rules in the screen below.

Figure 4-81 Bandwidth Control Rules List

¾Description - This is the information about the rules such as address range.

¾Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0.

¾Ingress bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default is 0.

¾Enable - This displays the status of the rule.

¾Modify - Click Modify to edit the rule. Click Delete to delete the rule.

To add/modify a Bandwidth Control rule, follow the steps below.

1.Click Add New… shown in Figure 4-81,you will see a new screen shown in Figure 4-82.

2.Enter the information like the screen shown below.

Figure 4-82 Bandwidth Control Rule Settings

3.Click the Save button.

-87-