TP-Link manual TL-WR1043ND Wireless N Gigabit Router, Method Two

TL-WR1043NDWireless N Gigabit Router

Figure 4-65 Quick Setup – Create an Internet Access Control Entry

¾Rule - In this field, create a name for the rule. Note that this name should be unique (e.g. Rule_1).

¾Host - In this field, select a host from the drop-down list for the rule. The default value is the Host Description you set just now.

¾Target - In this filed, select a target from the drop-down list for the rule. The default value is the Target Description you set just now.

¾Schedule - In this field, select a schedule from the drop-down list for the rule. The default value is the Schedule Description you set just now.

¾Status - In this field, there are two options, Enable or Disable. Select Enable so that the rule will take effect. Select Disable so that the rule won't take effect.

5.Click Finish to complete adding a new rule.

Method Two:

1.Click the Add New… button and the next screen will pop up as shown in Figure 4-66.

2.Give a name (e.g. Rule_1) for the rule in the Rule Name field.

3.Select a host from the Host drop-down list or choose “Click Here To Add New Host List”.

4.Select a target from the Target drop-sown list or choose “Click Here To Add New Target List”.

5.Select a schedule from the Schedule drop-down list or choose “Click Here To Add New Schedule”.

6.In the Status field, select Enabled or Disabled to enable or disable your entry.

7.Click the Save button.

-77-