Turbo Chef Technologies i5 service manual Updating the Software, Info Mode

18 INFO MODE

Updating the Software		Smart Card	USB Port
From the Oven Off screen,			Smart Card Reader Slot
1.	Insert the smart card (see Figure 21).
	If multiple smart cards are required, ensure
	the correct smart card is loaded first.
2.	From the COOLING DOWN or OVEN OFF
	mode, press and hold the Info key until the
	oven resets (approximately 5 seconds).
3.	When the oven beeps one long high tone,
	the load was successful. If a second card
	was provided, insert it.

4.When the oven restarts and the display turns on, the update is complete. Remove

the smart card. Figure 21: Inserting Smart Card/USB Device

NOTE: If the update is unsuccessful, the display will remain off and the oven will beep one long, low tone. If this occurs, repeat the above procedure. If the update fails multiple times, a smart card may be damaged. Contact TurboChef to obtain a new smart card.