Turbo Chef Technologies i5 Replacing Items - Removing Left Side Cover Required Figures A-7, A-8

Replacing Items - Removing Left Side Cover Required (Figures A-7, A-8)

DANGER: Before replacing any oven component, ensure the oven is removed from any power source. Replacing a component while the oven is plugged in can result in serious injury or death.

CAUTION: Before removing/installing any component, make sure it is disconnected from the wire harness (where applicable).

CAUTION: Be careful to not tear the insulation when servicing components. Always reset the insulation properly before reinstalling the side panel.

NOTE: Hardware listed is required for installing component to oven.

To remove the left side cover, remove the screws securing the panel to the oven frame. To re-install the left side cover, you may need to open the top cover (see page A-5).

Figure	Item Description	Item Part Number	Hardware Description	Hardware Part Number(s)
Reference #
1	Blower Motor (top)	I5-9040	Nut, 1/4 - 20, Serr Hex Flange, Plated	100906	(qty 4)
2	Blower Motor (bottom)	I5-9042	Nut, 1/4 - 20, Serr Hex Flange, Plated	100906	(qty 4)
3	Blower Wheel (top)	103551	None	None
4	Blower Wheel (bottom)	103550	None	None
5	Cover, Left Side	I5-9301	Screw, #8 Serr, PHD Truss, Black Oxide	101691	(qty 5)
6	EMI Filter	100546	Screw, M5 x 8, PPHD, Sems, SS	101707	(qty 4)
7	EMI Filter Bracket	I5-9257	Screw, #10-32 x 3/4 lg, PPH Sems, Int Th	102937 (qty 2)
8	Heat Slinger	102708	None	None
9	Helper Spring, Interlock Switch*	103599	None	None
10	Interlock Switch, Primary*	102012	Screw, #4-40 x 1”, PPH, Sems	102903 (qty 2)
11	Mounting Bracket, Interlock Switch*	I5-9272	Screw, #10-32 x 3/4 lg, PPH Sems, Int Th	102937 (qty 2)
12	Power Cord	I5-9127	None	None
13	Voltage Sensor	100783	Screw, Sh Mtl #8 x 1/2, Serrated PHTRH	101688 (qty 1)

* NOTE: For more interlock switch detail, see Figure A-11, page A-13.

A-9

APPENDIX - REPLACING OVEN COMPONENTS