Turbo Chef Technologies i5 Replacing Items - Removing Right Side Cover Required Figure A-9, A-11

A-11

Replacing Items - Removing Right Side Cover Required (Figure A-9)

DANGER: Before replacing any oven component, ensure the oven is removed from any power source. Replacing a component while the oven is plugged in can result in serious injury or death.

CAUTION: Before removing/installing any component, make sure it is disconnected from the wire harness (where applicable).

NOTE: Hardware listed is required for installing component to oven.

To remove the right side cover:

1.Remove the screws securing the panel to the oven frame.

2.Remove the right side cover.

2

1 3

4 5 6 7

Figure A-9: Removing Right Side Cover Required

8

APPENDIX

Figure	Item Description	Item Part Number	Hardware Description	Hardware Part Number(s)
Reference #
1	Catalytic Converter	I5-9066	None	None
2	Cover, Right Side	I5-9302	Screw, #8, Serr PPHD, Truss, Black Oxide	101691	(qty 5)
3	Heater Assembly	I5-9284	Screw, Sh Mtl #8 x 1/2, Serrated PHTRH	101688	(qty 10)
4	Helper Spring, Interlock Switch*	103599	None	None
5	Interlock Switch - Monitor*	102012	Screw, #4-40 x 1”, PPH, Sems	102903	(qty 2)
6	Interlock Switch - Secondary*	102012	Screw, #4-40 x 1”, PPH, Sems	102903	(qty 2)
7	Mounting Bracket, Interlock Switch*	I5-9272	Screw, #10-32 x 3/4 lg, PPH Sems, Int Th	102937	(qty 2)
8	RTD, Cook Cavity	HHC-6517	Screw, Sh Mtl #8 x 1/2, Serrated PHTRH	101688	(qty 2)

* NOTE: For more interlock switch detail, see Figure A-11, page A-13.

- REPLACING OVEN COMPONENTS