Turbo Chef Technologies i5 Test Mode - Self Test, Test Mode - Manufacturing Mode, Info Mode

16 INFO MODE

Test Mode - Self Test	-	Burn in
From TEST MODE, press the R4 soft key to access the	-	Serial number edit
	- Temperature measurement (F or C)
“Self Test” screen (Figure 15). From the “Self Test”
	- Self test (same as TEST MODE).
screen:
	-	Erase/default oven settings
- L1 soft key initiates a comprehensive self test.

The oven will check the door switches, blowers,	Microwave Leakage Test
magnetrons, and heaters in sequence.
	Press the L1 soft key to initiate the microwave
- L2 soft key initiates a door switch test only.
	leakage test. The oven will warm up to 500°F
- L3 soft key initiates a blower test only.
	(260°C). When warmup is complete, insert the
- L4 soft key initiates a magnetron test only.
	water load. Follow the steps on page 27.
- L5 soft key initiates a heater test only.
When each test completes, the oven will display	Microwave Power Test
	This test should only be performed by the
PASS or FAIL.
	manufacturer.

Test Mode - Manufacturing Mode

Press the R3 soft key to place the oven in

MANUFACTURING MODE (Figure 16). When in

MANUFACTURING MODE, the following tests and settings can be accessed:

-Microwave leakage test

-Microwave power test

Burn-In

Press the L3 soft key to initiate a 25-minute burn-in. This feature helps ensure all cavity walls reach ther- mal equilibrium before testing is conducted.

L1

AUTO TEST

SELF TEST

R1

L1

SERIAL NUMBER EDIT

L2

DOOR TEST

R2

L2

L3

BLOWER TEST

R3

L3

<

i 5 - D 1 0 0 0 1

>

L4

MAG TEST

R4

L4

L5

HEATER TEST

R5

L5

CANCEL

SAVE

P S M t

H

B

T

W

Figure 15: Self Test

Figure 17: Serial Number Edit

L1

MANUFACTURING MODE

R1

L1

ERASE SETTINGS

MW LEAK TEST

SELF TEST

L2

L2

MW POWER TEST

R2

ERASE COUNTERS

COMPLETE ERASE

AND FAULT LOGS

SETPOINT = 500F

L3

R3

L3

BURN IN

L4

R4

L4

SERIAL NUMBER EDIT

L5

FAHRENHEIT

ERASE/DEFAULT

R5

L5

R1

R2

R3

R4

R5

R1

R2

R3

R4

R5

Figure 16: Manufacturing Mode Figure 18: Erase Settings