Turbo Chef Technologies i5 service manual Unpacking Instructions, Lifting and Placing the Oven

3

Figure 2: Hand Grip Locations

Install or locate this appliance only in accordance with the instructions below.

Unpacking Instructions

1.Remove oven from packaging.

2.Before discarding packaging, check thoroughly for accessories, consumables, and literature.

3.Discard packaging.

4.Check cook cavity thoroughly for accessories, consumables, and literature. Discard any packaging.

Lifting and Placing the Oven

WARNING: Oven weighs approximately 275 lbs (125 kg). Never lift with fewer than two people.

WARNING: Lift only using the provided hand grips. Never lift the oven by the door handle or by its base.

WARNING: The oven must be properly placed on a table or countertop at all times. TurboChef will not recognize a fallen oven as a warrantable claim and is not liable for any injuries that may result.

WARNING: This oven is not intended for built-in installation (i.e., installing the oven in any structure that surrounds the oven by five or more sides). Be sure to provide a minimum of 2” (51 mm) clearance for all sides and 16” (406 mm) clearance for the top.

1.Position one or more persons at the front and rear of the oven.

2.Place hands into grips (see Figure 2) and lift.

3.Place the oven on a surface that is at least 30” (762 mm) deep and capable of supporting 280 lbs (127 kg). If installing onto an oven cart, make sure the wheels/casters are locked.

4.Install the oven rack or other provided cooking surface.

5.Plug in the oven.

NOTE: The oven is primarily serviced through its top. DO NOT install shelving directly over the unit. The operator will be responsible for service charges incurred as a result of added time required to access the top of the oven.

SPECIFICATIONS AND INSTALLATION