Vertex Standard FTM-10R manual DCS Code

MEMORY OPERATION

DCS CODE

The FTM-10Renables you to change the DCS Tone Code.

1.Recall the memory channel on which you wish to change the DCS code.

2.Press and hold the key for one second to enter the Memory Channel Customization

mode.

3. Rotate the DIAL knob to select Menu Item “M9 SQL DCS”.

4. Press the key to display the current DCS Code.

5. Rotate the DIAL knob to select desired DCS Tone Code.

6. Press the [VOL/SEL] key to save the new setting and re- turn to the memory recall mode.

DCS CODE

023	047	073	131	156	223	251	271	332	371	445	465	532	631	723
025	051	074	132	162	225	252	274	343	411	446	466	546	632	731
026	053	114	134	165	226	255	306	346	412	452	503	565	654	732
031	054	115	143	172	243	261	311	351	413	454	506	606	662	734
032	065	116	145	174	244	263	315	356	423	455	516	612	664	743
036	071	122	152	205	245	265	325	364	431	462	523	624	703	754
043	072	125	155	212	246	266	331	365	432	464	526	627	712	-

CTCSS/DCS OPERATION

The FTM-10Renables you to change the CTCSS/DCS operation (CTCSS/DCS mode, CTCSS Tone frequency, and DCS Tone Code) that was set previously.

1.Recall the memory channel on which you wish to change the CTCSS/DCS operation.

2.Press and hold the key for one second to enter the Memory Channel Customization

mode.

3. Rotate the DIAL knob to select Menu Item “M10 SQL TYPE”.

4. Press the key to display the current CTCSS/DCS op- eration mode.

5.Rotate the DIAL knob to select desired CTCSS/DCS operation mode. TONE ENC: Activates the CTCSS Encoder

TONE SQL: Activates the CTCSS Encoder/Decoder

REV TONE: Activates the Reverse CTCSS Decoder (Mutes receiver when matching tone is received)

DCS: Activates the Digital Coded Encoder/Decoder

OFF: Disable the CTCSS/DCS operation

6.Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.

FTM-10R OPERATING MANUAL 41