Vertex Standard FTM-10R manual Installation

INSTALLATION

SEPARATE INSTALLATION

6.Insert the supplied 3-m Connection Cable from the rear side of Rear Case (Figure 7-), and then attach the Con- nection Cable to the Rear Case using the previously removed Binding Plate

(Figure 7-).

6.Attach the Connection Cable to the Printed Circuit Board (Figure 8), and then replace the Rear Case to the Front Panel using the previously removed four screws (Figure 9).

7.Connect the 8-pin modular plug of the Connection Cable to the Transceiver

(Figure 10).

9.Mount the supplied Mobile Mounting Bracket to the any position using the supplied screws (Figure 11).

Figure 7

connector

Figure 8

Figure 9

Figure 10

Figure 11

FTM-10R OPERATING MANUAL 17