Vertex Standard FTM-10R manual Bluetooth Operation, Pairing

BLUETOOTH OPERATION

When the optional BU-1Bluetooth® Adapter Unit is installed, the FTM-10Ris enabled to send/receive voice messages with the optional BH-1Bluetooth® Headset via wireless links.

Pairing

When using the Bluetooth® Headset for the first time, the Bluetooth® Headset and the FTM-10Rmust be paired.

1.Turn the transceiver off.

2.Press and hold the [POWER] key while turning the power on again.

3.Press and hold the [VOL/SEL] key for one second to activate the Menu Mode.

4.Rotate the DIAL knob to select the Bluetooth® Adapter Unit you wish to pair.

Main Chassis’s Bluetooth® Adapter Unit: Menu Item “SF6

BLTH R”

Front Panel’s Bluetooth® Adapter Unit: Menu Item “SF7

BLTH F”

5. Press the PTT key.

The current PIN code appears.

When perform pairing of BH-1Bluetooth® Headset, skip to the next step. Otherwise, set the PIN number of the Bluetooth® Unit:

1. Following operation of step 4 (press the PTT key), ro- tate the DIAL knob to set the first digit of the PIN code.

2.Press the key to save the first digit of the PIN code and move on to the next place.

3.Repeat the previous steps to complete the PIN code. If you make a mistake, press the key to move back to the incorrect number, then re-enter the correct number.

6.Press and hold the power switch on the BH-1Bluetooth® Headset until the BH-1’s indicator blinks red/blue alternately.

7.Press the PTT key on the FTM-10Rto initiate the pairing.

8.If the pairing is successful, “LINK OK” notation will appear on the display. The FTM- 10R will turn off and back on again.

When the BH-1Bluetooth® Headset is correctly recognized by the FTM-10R , the BH-1’s indicator will blink blue.

Downloaded by

RadioAmateur.EU

60 FTM-10R OPERATING MANUAL