Vertex Standard FTM-10R manual CLOCK/TIMER Operation, SET UP the Clock

CLOCK/TIMER OPERATION

The FTM-10Rhas a 24-hour clock (accuracy: ±30 sec/month).

With the Clock/Timer, you may operate the following features:

PClock feature: Display the current time.

PStop Watch Timer feature.

		SET UP THE CLOCK
1.	Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
2.	Rotate the DIAL knob to select Menu Item “F9 CLOCK ON”.
3.	Press the	key to enable selection of this Menu Item.
4.	Rotate the DIAL knob to select “ON”.
5.	Press the [VOL/SEL] key to save the new setting and exit
	to normal operation.
6.	Press the [VOL/SEL] key repeatedly to display the Clock,
	Stop Watch Timer, or Thermometer.

7.Rotate the DIAL knob to select the Clock.

When the Clock is displayed in above step, this step is unnecessary

8.Press and hold the [VOL/SEL] key for one second to activate the Clock/Timer Customization mode.

9. Rotate the DIAL knob to select Menu Item “T1 TIME ADJ.”

10. Press the	key to display the current time.
11. Press and hold the				key. You will notice the “hour” col-
umn blinking. Rotate the DIAL knob to set the exact cur-
rent hour.
12. Press the		key to move the blinking column to “minute”.
Rotate the DIAL knob to set the exact current minute.
13. Press the		key to save the new setting.
When the			key is pressed in accordance with the time

signal from a radio station etc, the FTM-10R’s clock may be set more precisely.

14. Press the [VOL/SEL] key to exit to normal operation.

FTM-10R OPERATING MANUAL 53