Vertex Standard FTM-10R manual Set Mode Item F3 AF Pitch, Set Mode Item F4 AF Prest

MENU (“SET”) MODE

Set Mode Item [F3 AF PITCH]

Function: Select the Tone Pitch control for the received audio.

Available Values: LOW-3/LOW-2/LOW-1/NORMAL/HIGH-1/HIGH-2

Default: NORMAL

Set Mode Item [F4 AF PREST]

Function: Enable/Disable the Volume Setting Alert feature.

Available Values: OFF/OV ALERT/LV ALERT/ HV ALERT

Default: OFF

OV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob blinks orange when volume level is set to the ±3 steps of the preset level.

LV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob blinks orange when volume level is set to the preset level minus 3 steps.

HV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knob blinks orange when volume level is set to the preset level plus 3 steps above.

OFF: Disables the Volume Setting Alert feature.

Set Mode Item [F5 AF-VFO]

Function: Select the DIAL knob and display function.

Available Values: TOGGLE/AUTOBACK

Default: AUTOBACK

TOGGLE: Keeps the DIAL knob function and display until the [VOL/SEL] key is pressed once again.

AUTOBACK: The DIAL knob function and display comes back to frequency selection and frequency display after approximately 3 secs.

Set Mode Item [F6 BEEP]

Function: Enables/Disables the beeper.

Available Values: KEY+SC/KEY/OFF

Default: KEY+SC

KEY+SC:The beeper sounds when you press any key, or when the scanner stops. KEY: The beeper sounds when you press any key.

OFF: Beeper is disabled.

Set Mode Item [F7 BLU SAVE]

Function: Enable/Disable the battery saver of the optional BH-1 Bluetooth Headset.

Available Values: OFF/ON

Default: OFF

FTM-10R OPERATING MANUAL 93