Vertex Standard FTM-10R manual Listening to External Audio Input

LISTENING TO EXTERNAL AUDIO INPUT

The FTM-10Renables you to output the audio signal from the external audio equipment such as an iPod® to the speaker. You may operate on the amateur band while listening to your favorite music.

1.Turn off the FTM-10Rand external audio equipment.

2.Connect the external audio equipment to the LINE IN Jack on the rear panel of the

FTM-10R.

3.Turn on the FTM-10Rby pressing and holding the [POWER] key for two seconds.

4.Press the front panel / key to select the “LINE-IN” band.

5.Turn on the external audio equipment.

PPress the [VOL/SEL] key to adjust the volume (AF level) of the audio output level.

While the RED LED is on, the volume level can be adjusted with the dial knob.

PThe volume level is displayed on the LCD.

PAdjust the audio input level at the external audio equipment side.

PYou may monitor the amateur band and external audio signal at the same time when you activate the Club Channel Monitor function.

PYou may enjoy stereo listening from external audio Input. Use the optional BH-1 Bluetooth Headset with the FEP-4Ear Phone for BH-1or an aftermarket stereo speaker, and set the Menu Item “F42 STEREO”. See page 87 for detail.

When you have finished listening to the external audio, press front panel / key to select another band.

Audio output “L” Audio output “R”

GND

FTM-10R OPERATING MANUAL 59