Vertex Standard FTM-10R manual Menu SET Mode, Default Bold Itaric

MENU (“SET”) MODE

The FTM-10RMenu Mode, already described in parts of many previous chapters, is easy to activate and set. It may be used for configuration of a wide variety of transceiver parameters, some of which have not been detailed previously. Use the following procedure to activate the Menu mode:

1.Press and hold the [VOL/SEL] key for one second to enter the Menu mode.

2.Rotate the DIAL knob to select the Menu Item to be adjusted.

3.Press the key momentarily to enable adjustment of the Menu Item.

4.Rotate the DIAL knob to adjust or select the parameter to be changed on the Menu Item selected in the above step.

5.After completing your selection and adjustment, press the [VOL/SEL] key to save the new setting and exit to normal operation.

Item	Menu Item	Function	Available Values
#			(Default: Bold Itaric)
1	AF AUTO	Enables/Disables the Automatic Audio Volume Controller.	OFF/ON MIN/ON MID/ON MAX
			OFF/ AM AUTO / AM HOLD/
2	AF DUAL	Enables/Disables the AF DUAL operation.	FM AUTO/ FM HOLD/ LI AUTO
			/ LI HOLD
3	AF PITCH	Select the Tone Pitch control for the received audio.	LOW-3/LOW-2/LOW-1/
			NORMAL/HIGH-1/HIGH-2
4	AF PREST	Enable/Disable the Volume Setting Alert feature.	OFF/OV ALERT/LV ALERT/ HV
			ALERT
5	AF-VFO	Select the DIAL knob and display function.	TOGGLE/AUTOBACK
6	BEEP	Enables/Disables the beeper.	KEY+SC/KEY/OFF
7	BLU SAVE	Enable/Disable the battery saver of the optional BH-1 Bluetooth Head-	OFF/ON
		set.
8	BLU VOX	Enables/Disables the Bluetooth function (requires the optional BU-1	OFF/PTT/VOXHIGH/VOXLOW
		Bluetooth Unit).
9	CLOCK	Activates/Disables the Internal Clock/Stop Watch Timer.	OFF/ON
10	CLUB PRI	Activates the Club Channel Monitor.	OFF/AUTO/HOLD
11	DC VOLT	Indicates the DC Supply Voltage.	---
12	DIMMER	Setting of the display’s illumination level.	DIMMER 1 ~ DIMMER 5
13	DTMF	Programming of the DTMF Autodialer.	---
14	FKEY MOD	Selects the category which is recalled from the top panel /	FNC/FNC+MSG/MSG
		key.
			AF DUAL, ARTS, DIMMER,
			HORN 1, HORN 2, HORN 3,
15	FKEY SEL	Assigns a function to the Function Key.	HORN 4, INTERCOM, MONI,
			PA, REVERSE, SCAN, SQL
			LEVL, SSCH, TCALL, TX
			POWER, VOL.ITCOM
16	ID LIST	Programming a Member List for the Message feature.	---
17	ID REG	Sets your Personal ID for the Message feature.	---
18	MESSAGE	Programming a Message for the Message feature.	---
19	MIC GAIN	Adjust the microphone gain level.	MIN/LOW/NORMAL/HIGH/
			MAX
			TX LOW/RPTR/SQLTYP/REV/
20	MIC PRGM	Select the function of the microphone’s [PGM] key.	TSQLF/DCODE/MONI/TCALL/
			SSCH/ARTS/TAG/MHz/SCAN/
			CLUB/WX
21	PAGER	Enables/Disables the Enhanced CTCSS Paging & Code Squelch	OFF/ON
		function and setting the Receiving/Transmitting Pager Code for the
		Enhanced CTCSS Paging & Code Squelch function.
22	PTT LOCK	Enables/Disables the locking of the PTT key when the LOCK mode	OFF/ON
		is activated.
23	PTT MODE	Selects the PTT key function.	MOMENT/TOGGLE
24	RPT ARS	Enables/Disables the Automatic Repeater Shift function.	ON/OFF
25	RPT MODE	Sets the Repeater Shift Direction.	RPTR OFF/RPTR-/RPTR+ (Ú)

88 FTM-10R OPERATING MANUAL