MISCELLANEOUS SETTING
SCAN DIRECTION
By default, the VFO frequency will jump to the low band edge of the current band when the VFO frequency reaches the high band edge. You may change the scanner operation so that the VFO frequency will change to downward scanning when the VFO frequency reaches the high band edge.
1.Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
2.Rotate the DIAL knob to select Menu Item “F31 SCN DRCT”.
3.Press the 
key to enable selection of this Menu Item.
4.Rotate the DIAL knob to set the desired scan mode.
NORMAL:When the VFO frequency reaches the high band edge of the current band, the VFO frequency will jump to the low band edge of the current band (or vice versa).
RETURN: When the VFO frequency reaches the high band edge of the current band while scanning upward, the scanner will reverse direction and scan down- wards. (or vice versa).
5.Press the [VOL/SEL] key to save the new setting and exit to normal operation.
SCAN START DIRECTION
By default, the scanner initiates scanning upward when activates the scanner by pressing the top panels’ 
key. You may change the scan start direction to downward scanning.
1.Press and hold the [VOL/SEL] key for one second to activate the Menu mode.
2.Rotate the DIAL knob to select Menu Item “F33 SCN STRT”.
3.Press the 
key to enable selection of this Menu Item.
4.Rotate the DIAL knob to set the desired direction.
UP START: the scanner initiates scanning upward.
DWN.TRART: the scanner initiates scanning downward.
Press the [VOL/SEL] key to save the new setting and exit to normal operation.
81 |
