MEMORY OPERATION
LABELING MEMORY
You may wish to append an Alphanumeric “Tag” (label) to a memory or memories, to aid in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished using the Set (Menu) mode.
1.Recall the memory channel on which you wish to append a label.
2.Press and hold the 
key for one second to enter the Memory Channel Customization
mode.
3. Rotate the DIAL knob to select Menu Item “M4 MEM TAG.”
4. Press the 
key briefly, then rotate the DIAL knob to se- lect “ALPHA.”
5. Press and hold the 
key for one second to display the previous label.
6. Press the PTT key to clear any previous label, if needed.
7.Rotate the DIAL knob to select the first digit of the desired label.
8.Press the 
key to move to next character.
9.Repeat steps 6 and 7 to program the remaining letters, numbers, or symbols of the desired label. A total of eight characters may be used in the creation of a label.
10.If you make a mistake, press the 
key to backspace the cursor, then
Press the PTT key to delete all data after the cursor that may have been previously stored erroneously.
11.When you have programmed a label that is under eight characters, press and hold in the 
key for one second, until the “ALPHA” notation appears.
12.Press the [VOL/SEL] key to save the label and return to the memory recall mode. The labeled
To disable the
1.Recall the memory channel on which you wish the frequency to display.
2.Press and hold the 
key for one second to enter the Memory Channel Customization mode.
3.Rotate the DIAL knob to select Menu Item “M4 MEM TAG.”
4.Press the 
key briefly. Then, rotate the DIAL knob to select “FREQ.”
5.Press the [VOL/SEL] key to return to the memory recall mode. The memory channel frequency will now be displayed.
38 |
