Vertex Standard FTM-10R manual Smart Menu Features, Display Function

SMART MENU FEATURES

The FTM-10Rtop panel / keys, and the key select and enable operation of the following features:

				Select the function	[F] key
Display				Function
AF DUAL	Press the	key to activate the AF Dual function which enables receiv-
	ing an Amateur Band signal while listening to the signal of an FM Broad-
	cast Station at the same time.
ARTS	Press the		key to activate the ARTS feature.
DIMMER	Press the		key to enable adjustment of the display illumination level
	by the DIAL knob.
HORN 1	Press the PTT switch to activate the sound of a Gong Bell.
HORN 2	Press the PTT switch to activate the sound of a UFO in flight.
HORN 3	Press the PTT switch to activate the sound of a klaxon.
HORN 4	Press the PTT switch to activate the sound of a siren.
INTERCOM	Press the		key to activate the Intercom mode.
MONI	Press the		key to disable noise and tone squelch.
PA	Press the PTT switch to route your amplified voice through the PA
	speaker.
REVERSE	Press the		key to activate the Reverse feature.
SCAN	Press the		key to activate the scanner.
SQL LEVL	Press the		key to enable adjustment of the noise squelch threshold
	level by the DIAL knob.
SSCH	Press the		key to activate the Smart Search.
TCALL	Press the		key to activate the 1750 Hz Tone Burst.
TX POWER	Press the		key to change the transmit power level.
VOL.ITCOM	Press the		key to change the receiver audio level of the intercom
	receiver.

Advice: When one of the above features does not appear in the list, it is because that feature

is not assigned to the top panel / keys. Please insure the Menu “F14 FKEY MOD” is set to “FNC” or “FNC+MSG”.

24 FTM-10R OPERATING MANUAL