Vertex Standard FTM-10R manual Transmitter Power Level, Deleting Memory

MEMORY OPERATION

TRANSMITTER POWER LEVEL

The FTM-10Renables you to set the Transmitter Power Level for each memory channel individually.

1.Recall the memory channel on which you wish to set the Transmitter Power Level.

2.Press and hold the key for one second to enter the Memory Channel Customization mode.

3. Rotate the DIAL knob to select Menu Item “M12 TX POWER”.

4. Press the key briefly to display the current Transmitter Power Level.

5.Rotate the DIAL knob to the select desired Transmitter Power Level (“LOW”, “MID”, or “HIGH”).

6.Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.

	HIGH	MID	LOW
144 MHz	50 W	20 W	5 W
430 MHz	40 W

DELETING MEMORY

You may delete the memorized data (except CLUB memory channel) of the FTM-10Rmemories.

1.Recall the memory channel on which you wish to delete.

2.Press and hold the key for one second to enter the Memory Channel Customization mode.

3. Rotate the DIAL knob to select Menu Item “M13 DELETE”.

4. Press the key briefly to display the confirmation mes- sage (“DELETE Y”) on the LCD.

If you decide to cancel the Memory Channel Number Change, press the [VOL/SEL] key.

5. Press and hold the key for one second. The display will revert to memory mode.

Note: Once deleted, the channel data can not be recovered.

FTM-10R OPERATING MANUAL 43