FRONT PANEL & TOP PANEL

/

keys

 

These keys select the following operations.

• AF Dual Feature (See page 25)

• Reverse (See page 29)

• ARTS Feature (See page 26)

• Scan Operation (See page 30)

Display Dimmer (See page 27) • Smart Search Operation (See page 30)

Horn Alert Feature (See page 27) • Squelch Threshold Level (See page 31)

• Intercom Operation (See page 28)

• TCALL (See page 30)

• Monitor Feature (See page 28)

• TX Power Level (See page 32)

Public Address (See page 29)

Volume Level Control while Intercom Operation (See page 32)

PTT keys

Press this key to transmit.

Speak into the microphone while pressing this key.

PRelease this key to return to receive.

PYou may change this key function to “toggle” mode (toggle the “transmit” and “receive” mode each time the key is pressed). (See page 77)

TX/BUSY Indicator

This indicator glows green when a signal is received.

This indicator glows red during transmission. This indicator blinks blue when a message is received.

This indicator glows white when transmitting a message.

MIC

The internal microphone is located here. Speak into the grill in a normal voice level while pressing the PTT key.

VOL/SEL key

You may adjust the receiver audio level with the DIAL knob after pressing this key.

PThe LED to the left of the DIAL knob will glow red when the DIAL knob is set to control the receiver audio level.

PPress this key again or wait for three seconds, to cancel control of the audio level by the

Dial knob. Mute Function:

Press and hold this key for one second to temporarily mute the receiver audio. Press this key again to restore the receiver audio.

4

FTM-10R OPERATING MANUAL

Page 6
Image 6
Vertex Standard FTM-10R manual Front Panel & TOP Panel, Keys