West Bend Back to Basics UX-CC500 manual General problems, 111

Models: UX-CC500

1 139
Download 139 pages 27.77 Kb
Page 113
Image 113

Problems and Solutions

The quality of copies is

• Any dirt or material on the scanning glass will

poor and/or dark vertical

cause spots to appear on copies and transmitted

lines appear.

faxes. Clean the scanning glass as explained on

 

page 104.

 

 

Reception/copying is

• If reception or copying takes place continuously for

interrupted.

a long time, the print head may overheat. Turn off

 

the power and let it cool down. If overheating

 

frequently occurs, try changing the print contrast

 

setting to LIGHT (see page 25).

 

 

Dark vertical lines appear

• Try changing the print contrast setting to LIGHT

on copies and received

(see page 25).

faxes.

 

 

 

General problems

Problem

Solution

 

 

Auto-dial numbers cannot

• Make sure the fax is plugged in and the imaging

be stored in the fax.

film has been loaded. (Auto-dial numbers cannot

 

be stored if the imaging film has not been loaded.)

 

See Loading the Imaging Film in Chapter 1.

 

 

Nothing appears in the

• Make sure the power cord is properly plugged into

display.

a power outlet.

 

• Connect another electrical appliance to the outlet to

 

see if it has power.

 

 

The machine does not

• If a beep sound is not made when you press the

respond when you press

keys, unplug the power cord and then plug it in

any of its keys.

again several seconds later.

 

 

Automatic document

• Check the size and weight of the document (see

feeding does not work for

Transmittable Documents on page 69).

transmission or copying.

 

 

 

10. Trouble- shooting

111

Page 113
Image 113
West Bend Back to Basics UX-CC500 manual General problems, 111