West Bend Back to Basics UX-CC500 manual 115, FAX RX in Memory

	Messages and Signals
FAX RX IN MEMORY	A fax has been received in memory because the
	imaging film needs replacement, you have run out of
	printing paper, or the paper is jammed. The fax will
	print out automatically when the problem is fixed.
FUNCTION MODE	The FUNCTION key has been pressed.
INTERCOM	A cordless handset is paging the fax machine (lift the
	handset to talk), or the fax machine is paging a
	cordless handset. The name and number of the	-
	cordless handset appear alternately with	Trouble10. shooting
	INTERCOM.
LINE ERROR	Transmission or reception was not successful. Press
	the STOP key to clear the message and then try
	again. If the error persists, see Line Error on page
	108.
MEMORY IS FULL/	The memory is full. You may have too many
SEE MANUAL	messages recorded in the answering system. To
(alternating messages)	erase messages, see page 53.
	This message may also occur during fax reception if
	too much data is received before the pages can be
	printed out. If faxes have been received to memory
	because printing is not possible (an additional
	message will indicate the problem), resolve the
	problem so that printing can continue (see Substitute
	Reception to Memory on page 88).
	If you are attempting to transmit from memory, see If
	the memory becomes full on page 82.
	If you are copying, see If MEMORY IS FULL appears
	on page 89.
MEMORY PRINTING	The fax is preparing to or printing out a document
	from memory.
NO DATA	This appears if you attempt to search for an auto-dial
	number when none have been stored.
OFF HOOK	This appears if you forgot to replace the handset after
	using it to dial and send a fax. Replace the handset or
	press the STOP key to clear the message.
ON HOOK DIAL	The SPEAKER key has been pressed and the fax
	machine is waiting for you to dial.

115