West Bend Back to Basics UX-CC500 manual Setting the Reception Mode, Setting the reception mode

Setting the Reception Mode

Setting the Reception Mode

Your fax has three modes for receiving incoming faxes:

FAX mode:

Select this mode when you only want to receive faxes on your line. The fax machine will automatically answer all calls on four rings and receive incoming faxes.

TEL mode:

Select this mode when you want to receive both phone calls and faxes on the line connected to the fax machine. All calls, including faxes, must be answered by picking up the fax machine's handsetor an extension phone connected to the same line.

TAD mode:

Select this mode when you go out and want the answering system to answer all calls. Voice messages will be recorded, and fax messages will be received automatically (“TAD” stands for “Telephone Answering Device”.)

Setting the reception mode

Make sure a document is not loaded in the document feeder, and then

RESOLUTION/

press RECEPTION MODE until the arrow in the display points to the desired mode.

RESOLUTION/

RECEPTION MODE

1	2	3	RESOLUTION/
4	5	6	RECEPTION MODE
7	8	9
	0

TEL FAX

JAN-02 10:30

TAD

TEL FAX

JAN-02 10:30

TAD

TEL FAX

JAN-02 10:30

TAD

Note: TAD mode cannot be selected unless a general outgoing message has been recorded as explained on page 48.

For more information on receiving faxes in FAX and TEL modes, see Chapter 5, Receiving Faxes. For more information on using TAD mode, see Chapter 3, Using the Answering System.

30