West Bend Back to Basics UX-CC500 manual 113

Problems and Solutions

The battery does not	• Make sure the cordless handset is placed in the
charge.	charger with the dial pad facing forward.
	• Make sure the AC adapter is connected correctly to
	the charger and the power outlet (see page 17).
	• Wipe the charger contacts with a cotton swab.
	• Make sure the battery is properly connected inside
	the cordless handset (see page 18).
	• The battery may need replacement (see page 106).
You hear noise or	• Make sure the base antenna is fully upright on the
interference during a call.	fax machine (see page 17).
	• Other electrical appliances may cause interference.
	Move away from any electrical appliances.
	• Move closer to the fax machine. Note that large
	metal objects, metal structures, and thick walls
	between the fax machine and cordless handset will
	reduce the talking range. If needed, try moving the
	fax machine to a different location.
You hear beeps during a	• You will hear beeps during a call and LOW
call.	BATTERY will appear in the display if the battery is
	low. Place the cordless handset in the charger and
	let it recharge. If you hear beeps during a call and
	need to continue the call, press the INTERCOM
	key to transfer the call to the fax machine.
	• You will hear beeps during a call and OUT OF
	RANGE will appear in the display if you are outside
	of the talking range. Move closer to the fax
	machine.
When you press the	• The name was not transmitted to your cordless
INTERCOM key, the name	handset when it was entered (probably because
of one of the other	your cordless handset was in use). To retransmit
cordless handsets does	the name, repeat the name entry procedure on
not appear in the list (only	page 20. The name will automatically appear in the
the number appears),	display in Step 6, so simply press START/MEMORY to
even though a name has
been programmed for that	transmit the name then exit the procedure with Step
cordless handset.	8.

10. Trouble- shooting

113