West Bend Back to Basics UX-CC500 manual Sending a Fax by Automatic Dialing

Sending a Fax by Automatic Dialing

5 When you hear the fax tone, press START/MEMORY . Replace the handset.

•If the transmission is completed successfully, the fax will beep once.

•If an error occurs, the fax will beep three times and print a Transaction Report to inform you of the problem (see page 101).

Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears in the display, remove the document as explained on page 119. (This may occur if the other fax machine doesn’t respond properly when you attempt to send the document.)

Sending a Fax by Automatic Dialing

You can store your most frequently dialed fax or phone numbers in the machine for automatic dialing.

♦Auto-dial numbers can be stored using either the fax machine or the cordless handset (to store a number using the cordless handset, see page 36).

♦Numbers stored using the fax machine are stored in the Common book. A total of 40 numbers can be stored.

Storing fax and phone numbers for automatic dialing

1

2

Press FUNCTION once and		Display:
		once.
		<NEW NUMBER>
Press	once.	ENTER FAX #

3 Enter the fax or voice number by pressing the number keys. (Note: A space cannot be entered.)

•To clear a mistake, press SPEAKER .

•If a pause is required between any of the digits to access a special service or an outside line, press FUNCTION . The pause appears as a hyphen (two seconds per pause). Several pauses can be entered in a row.

74