West Bend Back to Basics UX-CC500 manual Retrieving your messages

Remote Operations

Retrieving your messages

Note: You can only access one box per call. If you wish to access more than one box, you must make a separate call for each box.

1 Call the machine from a touch-tone telephone. When the general

outgoing message begins, press on the telephone.

•You will hear a short beep, and the outgoing message will stop.

2 If you wish to listen to the messages in a personal box, enter the number of that box (otherwise, go directly to Step 3).

Example: 1 for Box 1

3 If you are accessing the general box, enter your remote code.

If you are accessing a personal box, enter the passcode of the box (if the box does not have a passcode, enter your remote code).

When finished, press .

•You will hear a series of beeps equal to the number of messages recorded in the box, or one long beep if four or more messages have been received. The machine will then play back the messages, beeping once at the end of each message. When all messages have been played back, you will hear a long beep.

•If no messages have been received, you will hear a short beep. You can either hang up, or perform any of the operations described in the following section, Other remote operations.

64