Xerox 4800, 2400 manual 31 Transparency masks

Three ways to scan

P/N:180700002060

Mask for 35mm slides Mask for 35mm negatives

Figure 2-31 Transparency masks

2.To scan a 35mm slide, first position the 35mm mask on the glass. The mask has one square corner. Align that corner with the arrow on the scanner body.

Make sure that the text on the 35mm mask faces up so the slide fits properly in the mask.

Follow the directions on the mask and place the 35mm slide horizontally into the slide holder.

Calibration slot

Figure 2-32 Slide placement

Notice that the mask has a narrow slot above the 35mm slide holder. That slot is for calibration to assure that you get the best possible scan results. Do not place items to be scanned in the calibration slot.

3.To scan a negative, first slide the filmstrip into the 35mm negative mask and center the frame you want to scan in the opening.

Then position that mask on the glass and align its square corner with the arrow on the scanner body. Make sure the text on the mask faces up.

2-28 4800/2400 Series Installation and User Guide