Getting started with your new scanner
installed in, and follow the instructions on the screen to install the scanner software on your computer.
When you are finished installing the software, a message instructs you to connect the scanner to the computer.
Figure
4.Follow the steps in “Step 2: Connecting the scanner” to connect the scanner. When you’re finished, click [Finish] in the dialog box above.
Step 2: Connecting the scanner
The One Touch scanner connects to any available USB port. Check your computer’s manual for the USB port location.
NOTE: You do not have to shut off the power to your computer when connecting the scanner to a USB port.
To connect your One Touch scanner:
1.Your scanner may have a locking tab. Turn the scanner over to see the locking tab on the bottom. Slide the locking tab to the unlocked position.
4800/2400 Series Installation and User Guide |
