Xerox 2400, 4800 manual Three ways to scan

Three ways to scan

Figure 2-33 Negative placement

The 35mm negative mask also has a calibration slot. Do not place items to be scanned in the calibration slot.

You’re now ready to scan the slide or negative. To scan a 35mm slide or negative:

1.Start the PaperPort software, click the [Scan] icon on the PaperPort command bar, and then click the [Scan] button in the Scan pane.

The Scan Manager Pro appears.

HINT: You can also start the Scan Manager Pro from the scanner buttons by setting a button to "Configure Before Scanning". See “Configuration dialog help button” on page 2-6.

2.Click the drop-down menu at the top of the Scan Manager Pro and choose the type of transparency to scan.

Scan 35mm Using: – Choose this option to scan 35mm slide positives.

Scan Negative Using: – Choose this option to scan negative film or 35mm slide negatives.

4800/2400 Series Installation and User Guide 2-29