Maintenance

Turning Off the Printer

1.Press the power switch located behind I/O door E on the rear right side of the printer to turn it off.

8X70-031

2.Within 10 seconds after turning off the printer, select Shutdown for Moving Printer on the control panel.

3.Wait for the printer to complete the cool-down period for the ink to solidify. The printer shuts down when it is cool enough to move.

4.Unplug the printer after the cool-down cycle is complete.

Note: Do not unplug the printer until the power-down and cooling sequence completes.

Packing the Printer

Repack the printer using the original packing material and boxes or a Xerox repackaging kit. Additional instructions for repacking the printer are provided in the repackaging kit. If you do not have all the original packaging, or are unable to repackage the printer, refer to the support website for information on contacting the support call center or contact your local Xerox reseller.

CAUTION: Damage to the printer resulting from improper moving, or failure to repackage the printer properly for shipment, is not covered by the warranty, service agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside these areas; please contact your local representative for details.

ColorQube 8570/8870 Color Printer

141

User Guide

 

Page 141
Image 141
Xerox 8570, 8870 manual Turning Off the Printer, Packing the Printer