Xerox 8870, 8570 manual Printing on Envelopes from Tray 2, 3, 4, or

Printing

6.At the Short Edge menu, do the following:

•If the correct short edge size is displayed as the current setup, press OK. Go to step 8.

•If the correct short edge size is not displayed, select Change > OK. To enter a new short edge size, use the Up and Down Arrow buttons to specify the envelope’s short edge size and then press OK.

7.At the Long Edge menu, do the following:

•If the correct long edge size is displayed as the current setup, press OK. Go to step 8.

•If the correct long edge size is not displayed, select Change > OK. To enter a new long edge size, use the Up and Down Arrow buttons to specify the envelope’s long edge size and then press OK.

8.At the Tray 1 Paper Type menu, select Envelope > OK.

9.In the printer driver, select either Envelope as the paper type or Tray 1 as the paper source.

Printing on Envelopes from Tray 2, 3, 4, or 5

1.Remove the tray from the printer and position its paper guides. For details, see Loading Paper in Tray 2, 3, 4, or 5 on page 59.

2.Insert no more than 40 envelopes into the tray, flap side down with the flap toward the right side of the tray as shown.

8X70-109

3.Adjust the paper guides to fit the envelopes.

8X70-117

Note: When the paper guides are adjusted correctly, there may be a small space between the envelopes and the guides.

72ColorQube 8570/8870 Color Printer User Guide