Printing

Selecting the Tray 2–N Mode

The Tray 2–N Mode setting specifies how paper size and type are determined for the feeder trays if size and type are not set at the control panel when new paper is loaded.

Note: If you do not have any optional feeder trays in your printer configuration, only Tray 2 Mode displays. If you have optional feeder trays, “N” represents the highest installed tray number.

Tray 2 Mode Setting

Description

 

 

Permanent

Paper size and type are set from the control panel using the Paper Tray

 

Setup > Tray 2 Paper menu.

 

 

Static

Same as Permanent, plus paper size and type can be set when paper is

 

loaded into Tray 2 when an error message on the control panel

 

instructs you to load paper.

 

 

Dynamic (default)

Same as Static, plus the paper size and type can be set by the first print

 

job that uses the tray after paper has been loaded. The size and type

 

are determined by the settings in the print job.

 

 

Tray modes can be set from the control panel or from CentreWare IS.

To set the Tray 2-N mode from the control panel:

1.On the printer control panel, select Paper Tray Setup and then press the OK button.

2.Select Tray 2 Mode > OK.

3.Use the Up and Down Arrow buttons to make a selection and then press OK.

4.To exit the menu, press the Back button until you return to the main menu.

To set the Tray 2-N Mode from CentreWare IS:

1.Launch your Web browser and then type the printer’s IP address in the browser’s Address field. For details on finding your printer’s IP address, see Finding the Printer’s IP Address on page 40.

2.At the CentreWare IS page, click Properties.

3.In the navigation pane on the left, expand the General folder and then click the Printer Defaults link.

4.In the User Preferences section, select the desired setting in the Tray 2–N Mode list.

5.Scroll to the bottom of the page and click the Save Changes button.

See also:

Printing on Specialty Media on page 66

ColorQube 8570/8870 Color Printer

65

User Guide

 

Page 65
Image 65
Xerox 8570, 8870 manual Selecting the Tray 2-N Mode, Tray 2 Mode Setting Description, Select Tray 2 Mode OK