Installation and Setup

Enabling and Disabling Power Saver Mode

1.On the printer control panel, if the Power Saver button is blinking slowly, the printer is in Power Saver mode. Press the blinking button to bring the printer out of Power Saver mode.

2.If the Power Saver button is off, the printer is not ready to be put in Power Saver mode. Wait until the button is on, then press it.

Note: You cannot put the printer into Power Saver mode if it is processing a job, in warmup mode, cleaning, or shutting down. The Power Saver button is off when the printer cannot be put in Power Saver mode.

See also:

Control Panel on page 20

Fast Resume

When Fast Resume is enabled, it brings the printer out of Power Saver and Standby modes more quickly. However, this changes the default power saver timeouts and increases energy usage.

To enable or disable Fast Resume from the printer control panel:

1.Select Printer Setup and press the OK button.

2.Select Printer Controls > OK.

3.Select Fast Resume > OK. To change the setting, press OK again.

Note: You can also set Fast Resume from CentreWare IS. For details, click the Help button in CentreWare IS.

ColorQube 8570/8870 Color Printer

49

User Guide

 

Page 49
Image 49
Xerox 8570, 8870 manual Fast Resume, Enabling and Disabling Power Saver Mode, Select Printer Controls OK