Xerox FS-C8008DN, FS-C8008N manual Resetting the Custom Paper Type, 3-80

3.10 Paper Handling

6	When the desired fuser mode is displayed, press the ENTER key. Proceed to the next
	step.

Enabling or Disabling Duplex Printing for Custom Paper Type

This parameter is valid for the FS-C8008DN printer which is equipped with the duplexer as a standard feature. When this parameter is disabled for a Custom type, the printer does not duplex print when the custom size is selected for the paper type in a print job.

By default, duplex printing is enabled for custom paper types. To confirm and change this, proceed as follows:

1

2

3

Complete Step 3. above.

Press the Z key.

Press the U or V key repeatedly until >>Duplex Path appears.

>>Duplex Path Enable

4	To change duplex printing, press the ENTER key. A blinking question mark (?)
	appears.

5

6

7

>>Duplex Path ? Enable

Press the U or V key to change from Enable to Disable.

Press the ENTER key. The duplex printing capability is changed.

To exit the menu selection, press the MENU key.

3.10.9Resetting the Custom Paper Type

If you want to reset all custom paper type settings (1 to 8) to the factory default, proceed as follows:

1

2

Press the MENU key.

Press the U or V key repeatedly until Paper Handling > appears.

Paper Handling >

3 Press the Z key.

3-80