Xerox FS-C8008N, FS-C8008DN manual Push down the two socket clamps to secure the memory modules

			Installing the Memory Modules
4	Push out the clamps on both ends of the memory socket on the main controller board.
		Clamps

	Figure A-5
5	Remove the memory module from its package. Aligning the cutouts of the memory
	module with the matching keys of the socket, carefully plug the memory module into

the memory socket until it clicks in place.

Cutouts

	Figure A-6
6	Push down the two socket clamps to secure the memory modules.
		Clamps

	Figure A-7
7	After you finish installing the memory modules, reinstall the main controller board
	and fasten it with screws.

A-5