Xerox FS-C8008DN, FS-C8008N manual Printing a Network Interface Status Page, Network Status Page

3.5 Changing the Interface Parameters

Printing a Network Interface Status Page

You can have your printer print out a network status page when the printer prints the status page. The network status page shows the network addresses, and other information under various network protocols about the network interface card. The default setting is Off (print disable).

Printing out a network interface status page may not be possible with the optional network interface card. For details, see the manual for the network interface.

Note

A sample network status page is shown on Figure 3-7 on page 3-41.

1

2

Press the MENU key.

Press the ENTER key repeatedly until Interface > appears.

Interface >

Parallel

3	If the interface is other than network, press the ENTER key. A blinking question
	mark (?) appears.
				Interface
			? Parallel
4	Press the U or V key repeatedly until Network appears. Press the ENTER key.
				Interface
			? Network
5	Press the Z key and then press the U or V key repeatedly until the display shows
	>Network Status Page.
		>Network Status
				Page Off
6
	The default setting is Off. If it is set to On, press the ENTER key. A blinking
	question mark (?) appears.
		>Network			Status
				Page ? Off
7	Press the U or V key to select On.
		>Network			Status
				Page ? On

3-40