Xerox FS-C8008DN Long edge bind, Short edge bind, Note on Duplex Printing from the MP Tray, 3-76

3.10 Paper Handling

To select duplex printing and binding from the operator panel, use the following procedure:

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Paper Handling > appears.

Paper Handling >

Press the Z key.

Press the U or V key repeatedly until >Duplex Mode appears.

>Duplex Mode

None

5	To activate duplex printing, press the ENTER key. A blinking question mark (?)
	appears.
		>Duplex Mode
6		?None
	Press the U or V key to display the desired binding mode. The message display
	toggles through the following:
	None (default)
	Long edge bind
	Short edge bind
7	When the desired binding mode is displayed, press the ENTER key. The binding
	mode is set.
8	To exit the menu selection, press the MENU key.

Note on Duplex Printing from the MP Tray

•You cannot select the MP tray, when it is set to ‘cassette’ mode, to perform duplex printing. To perform duplex printing, select a paper cassette.

•It is possible to duplex-print using the MP tray if it is set in ‘first’ mode. (See Section 3.10.1 MP Tray Mode on page 3-69.) However, be sure to set the MP tray paper size and paper type to the same paper size and paper type as those of the current paper cassette. If the paper size or type differs, a paper jam may occur.

3-76