Xerox FS-C8008N, FS-C8008DN manual Deleting a Private/Stored Job, 3-25, e-MPS

					3.4 e-MPS
9	Press the ENTER key. The ID input line appears. Enter the four-digit access code
	entered in the printer driver and press the ENTER key.
		>Agenda
		ID	0000
	To enter the ID, press the Y or Z key to move the cursor to the number to be
	changed and then enter the correct number by pressing the U or V key.
10	You can set the number of copies to be printed. To increase the copy count, press the
	U key; to decrease the copy count, press the V key.
		>Agenda
		Copies	00
				1
11	Press the ENTER key to finalize the copy count. The printer prints the specified
	number of copies for the job.

Deleting a Private/Stored Job

You can individually delete stored jobs by performing the following procedure. Jobs saved using Private Print will be automatically deleted if you turn the power off after printing, but jobs saved using Stored Job will not be deleted automatically.

1

2

Follow steps 1 through 8 in the above section.

When the title of the job to be printed is displayed (Agenda, in this example), press the ENTER key. Enter the four-digit access code entered in the printer driver and press the ENTER key.

>Agenda

Copies 001

3 Press the V key repeatedly until Delete appears for the number of copies.

>Agenda Delete

4 Press the ENTER key. The private job is deleted from the hard disk.

3-25