Xerox FS-C8008N, FS-C8008DN manual Gloss Mode, 3-59

3.8 Setting Print Quality

3.8.2Gloss Mode

The gloss mode, when set to High, increases the effect of glossiness in printing by reducing the printing speed by half. The gloss mode is not available when Transparency is selected as the paper type setting.

Depending on the paper used, printing in gloss mode may cause wrinkle in paper. To reduce wrinkle, try using thicker paper.

Note

The default gloss mode is Low. To confirm or change the gloss mode, proceed as follows:

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Print Quality > appears.

Print Quality >

Press the Z key.

Press the U or V key repeatedly until >Gloss Mode appears.

>Gloss Mode

Low

5	To change the gloss mode, press the ENTER key. A blinking question mark (?)
	appears.

6

7

8

>Gloss Mode

? Low

Press the U or V key to change from Low to High.

Press the ENTER key to finalize the selection.

Press the MENU key. The display returns to Ready.

3-59