Manuals / Xerox / Computer Equipment / Printer

Xerox FS-C8008N manual Courier ? Regular, Selecting Regular or Dark Courier/Letter Gothic, 3-47

Models: FS-C8008DN FS-C8008N

1 214

Download 214 pages 7.73 Kb

Page 92

Image 92

3.6 Making Default Settings

Selecting Regular or Dark Courier/Letter Gothic

Courier or Letter Gothic font thickness can be selected as Regular or Dark. In the procedure below, it is assumed that Courier is selected. The procedure is the same for Letter Gothic.

Press the MENU key.

Press the U or V key repeatedly until Font > appears.

Font>

Press the Z key. Press the U or V key until >Font Select > appears.

>Font Select >

Internal

Make sure that Internal is displayed and press the Z key.

Press the U or V key repeatedly until >>Courier appears. If you are selecting the thickness of the Letter Gothic font, choose >> Letter Gothic here instead.

>>Courier Regular

Press the ENTER key. A blinking question mark (?) appears.

>>Courier ? Regular

Select Regular or Dark using the U or V key.

Press the ENTER key.

Press the MENU key. The display returns to Ready.

3-47

Page 92

Image 92

Xerox FS-C8008N, FS-C8008DN manual Courier ? Regular, Selecting Regular or Dark Courier/Letter Gothic, 3-47

Contents

FS-C8008N FS-C8008DN Operation GuideColor Laser Printer FS--C8008NCautions Symbols Notice on Software Regarding Tradenames2. Limited Warranty IBM PROGRAM LICENSE AGREEMENTTypeface Trademark Acknowledgement 1. LicenseAgfa Monotype License Agreement FCC statement for users in the United States Cautionary Labels Important Notes for Interface connectorsSafety information U.S. CDRH regulations Ozone concentrationCE Marking Directive viiiDeclaration of Conformity for U.S.A Disclaimer Declaration of Conformity for AustraliaCanadian Department of Communications compliance statement Group for Energy Efficient Appliances GEEA ENERGY STAROther Precautions Installation PrecautionsEnvironment Other Precautions Power Supply/Grounding the PrinterHandling of Plastic Bags xiii Precautions for UseCautions when Using the Printer Cautions for Toner Handling Other PrecautionsNever open the toner container Keep away the toner containerFor More Information DescriptionChapter 3 Using the Operator Panel Chapter 4 TroubleshootingChapter 5 Maintenance Appendix C Technical SpecificationsContents Chapter 3 Using the Operator PanelChapter 1 Introduction Chapter 2 Handling PaperChapter 4 Troubleshooting Chapter 5 Maintenance Appendix C Technical SpecificationsAppendix A Options Appendix B Computer InterfaceEcosys Color FS-C8008DN Chapter 1 IntroductionEcosys Color FS-C8008N 1.1 Features 1.1.1 General1.1.2 Hardware Sleep mode1.1.3 Software Two expansion slots for hardware interfacesStandard bidirectional parallel interface Memory card slot1.1.4 Networking PDF417 two-dimensional bar codesKPDL3 Kyocera Printer Description Language Account Management System1.2 Parts and Functions 1.2.1 FrontThis tray receives printouts face down 1.2.2 Internal 7 Waste Toner Box 8 Fuser Unit9 Paper Transfer Unit 10 Primary Transfer Unit1.2.3 Rear 1-10 9 Hard Disk Slot HDD10 Exhaust Duct 11 Quick Reference Guide HolderChapter 2 Handling Paper 2.1.1 Available paper types 2.1.2 Paper specifications2.1 General Table 2-1 Continued 2.1.3 Minimum and Maximum Paper Sizes2.1.4 Recommended Paper 2.2 Selecting the Right Paper 2.2.1 GuidelinesPaper conditions Paper composition2.2.2 Paper properties Basis weightsPaper Weight Equivalence Table SmoothnessGrain Moisture contentThickness Caliper 2.2.3 Other properties of paper PorosityStiffness Curl2.3 Loading Paper 2.3.1 Loading Paper into the Cassettepaper size 2.3.2 Loading Paper into the MP Multi-Purpose Tray the Operator Panel, section 3.10.2 Setting MP Tray Paper Size on page2-10 2.3 Loading Paper2-11 2.4 Special Paper2.4.1 Selecting the Special Paper 2-12 TransparencyAdhesive-backed labels Value Postcards2-13 Envelopes Colored paperPre-printed paper Recycled paperChapter 3 Using the Operator Panel Status Information 3.1 Understanding the Operator Panel3.1.1 Message Display 3.1.2 Indicators in Message Display Error codesSee Chapter 4 Troubleshooting Interface Indicator INTERFACEPaper Size Indicator SIZE Paper Type Indicator TYPE READY, DATA, and ATTENTION IndicatorsGO Key 3.1.3 KeysCANCEL Key ENTER Key MENU KeyArrow Keys Entering the Mode Selection Menu 3.2 Using the Menu Selection System3.2.1 Menu Selection System Type Adjust Paper Weight NormalSetting a Menu Cancelling Menu Selection3.2.2 Menu System Road Map 3.2 Using the Menu Selection System3-10 MENU Key3.2 Using the Menu Selection System 3-11Continued Continued on the next page3.2 Using the Menu Selection System 3-12Continued Continued on the next page3.2 Using the Menu Selection System DupEnablex Path3-13 Continued3.2 Using the Menu Selection System 3-14Continued Life Counters Others3-15 3.3 Menu Map and Status Pages3.3.1 Printing a Menu Map MENU MAP FS-C8008N Page Printer3-16 3.3 Menu Map and Status Pages3.3.2 Printing a Status Page Print Status PagePrint Status Page ?3-18 STATUS PAGEUnderstanding the Status Page This item shows Standard memory in the printer 128 MB 3-193-20 3.4 e-MPSJob Retention 3.4.1 Using Quick Copy Job StorageVirtual Mailbox 3-21Printing Additional Copies using Quick Copy e-MPSQuick Copy Harold Quick Copy ?Harold3.4.2 Using Proof-and-Hold See Printing Additional Copies using Quick Copy on page ChapterDeleting a Quick Copy Job Printing Remaining Copies of a Proof and Hold Job3-24 3.4.3 Printing a Private Print/Job RetentionReleasing a Private/Stored Job 3.4 e-MPS Deleting a Private/Stored Job3-25 Printing a Code Job Browse through Windows Start Programs KYOCERA MITA KM-NetJob Manager 3-26PERMANENT CODE JOB LIST Printing a List of Code JobsFigure 3-5 below 3-273-28 3.4.4 Retrieving Jobs from Virtual Mailbox VMBPrinting a List of VMB VIRTUAL MAIL BOX LIST List of VMBList of VMB ? 3-293-30 3.4.5 Changing e-MPS ConfigurationChanging the Maximum Number of Quick Copy/Proof-and-Hold Jobs Maximum Space Assigned to Temporary Code Jobs 3-31e-MPS Configuration e-MPSPerm. Code JOB Size 1550MB Perm. Code JOB Size 1550MBe-MPS Configuration e-MPSVMB Size 1550MB VMB Size3-34 3.5.1 Changing Parallel Interface Mode3.5 Changing the Interface Parameters 3-35 3.5.2 Changing Serial Interface ParametersNibble high Auto Normal High Speed 1200, 2400, 4800, 9600 Default, 19200, 38400, 57600 None Default, Odd, Even, or IgnoreBaud Rate Data Bits Stop Bits Parity None Protocol DTRpos.&XON Baud Rate ?Press the U or V key repeatedly until Network appears 3.5.3 Changing Network Interface Parameters3-37 press the U or V key to change from Off to On, and press the ENTER key 3-383.5.4 Resolving IP Address Printing a Network Interface Status Page Network Status PagePress the ENTER key again NETWORK STATUS PAGE3-41 3.5 Changing the Interface Parameters3-42 3.6 Making Default Settings3.6.1 Default Emulation 3.6.2 KC-GL Pen Width and Color KC-GL Pen Adjust ? PenEmulation KC-GL Pen1 Width3.6.3 Alternative Emulation for KPDL Emulation 3-443.6.4 Printing KPDL Errors Emulation PCLEmulation ?PCL Emulation ?KPDL3.6.5 Default Font FontFont Select Internal ?I0003-47 Courier ? RegularSelecting Regular or Dark Courier/Letter Gothic Changing the Default Font Size FontFont Select Internal Size 012.00 pointsFont Font Select InternalPitch 10.00 cpi PitchSetting the Code Set FontCode Set IBM PC-8 Code Set ?IBM PC-8Printing Lists of Fonts 3-513.6 Making Default Settings 3-52Internal Scalable and Bitmapped Fonts List PRESCRIBE3-53 3.7 Pagination3.7.1 Number of Copies Portrait Orientation 3.7.2 Print Orientation3-54 3.7.3 Page Protect Mode Page setPage Protect On Page Protect ? OnPress the U or V key repeatedly until Page Set appears 3.7.4 Linefeed LF Action3-56 3.7.5 Carriage-Return CR Action Page SetCR Action CR only CR Action ? CR only3-58 3.8 Setting Print Quality3.8.1 Tone Mode 3.8.2 Gloss Mode 3-593.9.1 Using the Memory Card 3.9 Operating the Storage DeviceMemory Card on page A-7 Reading Font Data3.9 Operating the Storage Device Reading Data3-61 Formatting a Memory Card on page Writing Data3-62 3-63 WRITE INFORMATIONDeleting Data Formatting a Memory Card 3-64memory card Formatting of the memory card must be executed from the printer3-65 FORMAT INFORMATIONPrinting a List of Data Names Partitions PARTITION LIST Device Information Partition Information3-66 Device Name/Number3-67 3.9.2 Using the Option Hard Disk3.9.3 Using the RAM Disk Setting the RAM Disk Size 3-683-69 3.10.1 MP Tray Mode3.10 Paper Handling 3.10.2 Setting MP Tray Paper Size 3-703-71 3.10 Paper Handling3-72 3.10.3 Setting the MP Tray Paper TypeHandling Paper 3-73 3.10.4 Setting the Cassette Paper TypeChapter 2 Handling Paper 3-74 3.10.5 Selecting the Paper Feed SourceMP tray Cassette Cassette Cassette Cassette Cassette Cassette 3-75 3.10.6 Duplex Printing FS-C8008DNBinding Modes Long edge bind Short edge bindNote on Duplex Printing from the MP Tray 3-763.10.7 Overriding Difference between A4 and Letter Paper HandlingOverride A4/LT Off Override A4/LT ? Off3.10.8 Creating Custom Paper Types Resetting the Custom Paper Type on pageStep 1. Selecting the Custom Type Position 3-78Step 2. Selecting the Paper Weight Step 3. Selecting the Fuser ModeHeavy Thick Extra Heavy3-80 3.10.9 Resetting the Custom Paper TypeEnabling or Disabling Duplex Printing for Custom Paper Type 3.10.10 Selecting the Output Stack Face-down trayFace-up tray 3-813.10.11 Selecting the Option Sorter Mode Face-down tray Stacker F-up Stacker F-downFace-down tray Finisher F-up Finisher F-down Face-down tray Sorter F-up SorterSorter mode Collator modeMailbox mode 3-83Sorter Mode Sorter Sorter Mode? Sorter Collator3.11 Selecting Monochrome or Color Printing Color Mode ColorColor Mode ? Color 3-853-86 3.12 Reading Life Counters3.12.1 Displaying the Total Printed Pages 3-87 3.12.2 Resetting the Toner CounterContainer Replacement on page 3-88 3.13 Other Modes3.13.1 Selecting the Message Language 3-89 3.13.2 Automatic Form Feed Timeout SettingEnglish Francais Deutsch Italiano Nederlands Espanol Portuglls 3.13.3 Setting the Sleep Timer Sleep Timer 030 minSleep Mode Sleep ModeSleep Timer Timeout Time 3-913-92 3.13.4 Received Data DumpCANCEL key 3.13.5 Printer Resetting 3-93Press the U or V key to select Permanent or Perm / Temp Permanent 3.13.6 Resource Protection3-94 3.13.7 Alarm Buzzer Setting OthersBuzzer Off Buzzer ? Off3-96 3.13.8 Auto Continue SettingFor setting the auto continue recovery time, see the next section 3.13.9 Setting the Auto Continue Recovery Time Auto Continue Mode OnAuto Continue Timer 030sec Timer 030sec3.13.10 Duplex Printing Error Detection Setting Finishing ErrorOthers Duplex Off3.13.11 Printing the Service Status Page ServiceOthers Print Status Page3.13.12 Color Calibration ServiceOthers Color CalibrationClearing Paper Jams Chapter 4 TroubleshootingGeneral Guidelines Print Quality Problems Error Messages 4.1 General Guidelines 4.1.1 Tips4.2 Print Quality Problems Chapter 5 Maintenance, section 5.1 Toner Con tainer Replacement on pagesee Chapter 5 Maintenance, section 5.3.2 Cleaning see Chapter 5 Maintenance, section 5.3.2 Cleaningsee Chapter 5 Maintenance, section 5.3.2 Cleaning Using the Operator Panel, section 3.13.12 ColorChapter 5 Maintenance, section 5.3.1 Cleaning the see Chapter 5 Maintenance, section 5.3.2 Cleaning4.3 Error Messages Chapter 3 Using the Operator Panel, section Formatting a Memory Card MessageCorrective Action on pageMessage Corrective Action3-74 3-744.3 Error Messages MessageCorrective Action Table 4-3 Continued4-10 MessageCorrective Action The optional bulk stacker ST-30 tray is full. Remove paper sheetsStorage Error Codes Hard Disk Errors Memory Card ErrorsRAM Disk Errors 4-114-12 4.4 Clearing Paper Jams4.4.1 Possible Paper Jam Locations 4-13 4.4.2 General considerations for clearing jamsUtilizing Online Help Messages 4-14 4.4.3 Paper Jam - Right Cover #4.4.4 Paper Jam - Cassette # 4.4.5 Paper Jam - MP Tray Reset the sheets on the MP trayThe paper jammed in the MP tray. Clear the jam in the MP tray Remove the jammed paper on the MP tray up and towards the right4.4.6 Paper Jam - Duplexer paper under the rollerthe duplexer drawer completely 4-16Open the front cover 4.4.7 Paper Jam - Paper Transfer Unit4-17 the cover transfer unit, remove the paper4-18 4.4 Clearing Paper Jamsgreen-colored lock lever Open the fuser top cover. Remove the jammed paper4-19 4.4 Clearing Paper Jamson the rear side while removing the paper 4-20primary transfer unit 4-214.4.8 Paper Jam - Left Cover 4-224-23 4.4.9 Paper Jam - Option Stacker/Finisher/SorterUnit on page Chapter 5 Maintenance Also, the following parts need periodic cleaning Paper Transfer UnitTK-800 C/M/Y/K Toner Kits Waste Toner Box Main Charger Unit5.1 Toner Container Replacement 5.1.1 Frequency of toner container replacementStarter Toner Containers Toner Kits5.1.2 Understanding Messages Requesting Toner Container Replacement 5.1.3 Replacing the Toner Container when it is properly seated 5.2 Replacing the Waste Toner Box place 5.3 Cleaning the Printer 5.3.1 Cleaning the Paper Transfer UnitGrasp handle on the paper transfer unit and slowly pull it out Clean the registration roller metal using the cleaning cloth5.3 Cleaning the Printer 4 Clean the rubber belts black using the cleaning cloth 5.3 Cleaning the PrinterPush the paper transfer unit back in completely 5-105-11 5.3 Cleaning the PrinterClose the front cover 5-12 5.3.2 Cleaning the Main Charger Unitthe grid cleaner out of the protective bag and remove the cap The grid cleaner cannot be reused. Close the front cover 5-13Appendix A Options A.1 Options standard IB-21E built-in standard Optional 2nd IB-20/22Figure A-1 A.1 OptionsA.2 Expansion Memory Modules A.2.1 Installing the Memory Modules Pull out the main controller board gentlyFigure A-3 Figure A-4Push down the two socket clamps to secure the memory modules and fasten it with screwsTesting the expanded memory Removing a Memory ModuleReading Font from the Memory Card A.3 General Description of OptionsA.3.1 Memory Card A.3.2 PF-30A Paper Feeder A.3.3 PD-800 Duplex Unit A.3.5 ST-30 Bulk Stacker A-10A-11 A.3.6 DF-31 Document FinisherA.3.7 CA-31 Casters and CA-31B Caster Kit A.3.8 Hard Disk Do not install the hard disk in the OPT lower slotdisk installation A-12A.3.9 IB-20/IB-21E/IB-22 Network Interface Cards A-13USB Interface Serial Interface Option Appendix B Computer InterfaceThis appendix explains the following topics Parallel Interface B.1 Parallel Interface B.1.1 Communication ModesB.1.2 Interface Signals Signal In orDescription Table B-2B.2.1 Specifications B.2.2 Interface SignalsB.2 USB Interface Basic specificationB.3.2 Interface voltage levels B.3.1 Interface SignalsB.3 Serial Interface Option B.4 RS-232C Protocol B.4.1 Parameters of the RS-232C ProtocolH1 Baud rate H2 Number of data bitsB.4.2 PRESCRIBE FRPO D0 Command H4 ParityH5 Protocol logic H6 Buffer nearly-full thresholdB.5.1 Preparing an RS-232C Cable B.5.2 Connecting the Printer to the ComputerB.5 RS-232C Cable Connection B-10 3.5.2 Changing Serial Interface Parameters on pageDouble click on Communications Port Figure B-4 B-11Figure B-3 In DOS, enter the following commands To test the interface, enter the followingB-12 B.5 RS-232C Cable ConnectionAppendix C Technical Specifications The technical specification may be changed for improvement purposePrinter Specification SpecificationSee section C.2 Printing Speeds on page C-4 cations on pageSpecification Table C-1 ContinuedPrinting Speeds ModePaper Size Print SpeedsIndex Index-1Index-2 Index-3 2002 by KYOCERA MITA CORPORATION All rights reserved. Revision 1.0 Kyocera Mita Corporation2-28, 1-Chome, Tamatsukuri Chuo-ku, Osaka, 540-8585 Japan