Manuals / Xerox / Computer Equipment / Printer

Xerox FS-C8008DN manual Font, Code Set IBM PC-8, Code Set ?IBM PC-8, Setting the Code Set, 3-50

Models: FS-C8008DN FS-C8008N

1 214

Download 214 pages 7.73 Kb

Page 95

Image 95

3.6 Making Default Settings

Setting the Code Set

You can change the character code set. Available character code sets vary depending on the current font. (The default is IBM PC-8.)

Press the MENU key.

Press the U or V key repeatedly until Font > appears.

Font>

Press the Z key.

Press the U or V key repeatedly until >Code Set appears.

>Code Set IBM PC-8

5 Press the ENTER key. A blinking question mark (?) appears.

>Code Set ?IBM PC-8

Press the U or V key until the desired character code set appears.

Press the ENTER key.

Press the MENU key. The display returns to Ready.

3-50

Page 95

Image 95

Xerox FS-C8008DN, FS-C8008N manual Font, Code Set IBM PC-8, Code Set ?IBM PC-8, Setting the Code Set, 3-50

Contents

FS--C8008N FS-C8008N FS-C8008DNOperation Guide Color Laser PrinterCautions Symbols Regarding Tradenames Notice on Software1. License 2. Limited WarrantyIBM PROGRAM LICENSE AGREEMENT Typeface Trademark AcknowledgementAgfa Monotype License Agreement FCC statement for users in the United States Cautionary Labels Important Notes for Interface connectorsSafety information Ozone concentration U.S. CDRH regulationsCE Marking Directive viiiDeclaration of Conformity for U.S.A Disclaimer Declaration of Conformity for AustraliaCanadian Department of Communications compliance statement ENERGY STAR Group for Energy Efficient Appliances GEEAOther Precautions Installation PrecautionsEnvironment Other Precautions Power Supply/Grounding the PrinterHandling of Plastic Bags xiii Precautions for UseCautions when Using the Printer Keep away the toner container Cautions for Toner HandlingOther Precautions Never open the toner containerDescription For More InformationAppendix C Technical Specifications Chapter 3 Using the Operator PanelChapter 4 Troubleshooting Chapter 5 MaintenanceChapter 2 Handling Paper ContentsChapter 3 Using the Operator Panel Chapter 1 IntroductionChapter 4 Troubleshooting Appendix B Computer Interface Chapter 5 MaintenanceAppendix C Technical Specifications Appendix A OptionsEcosys Color FS-C8008DN Chapter 1 IntroductionEcosys Color FS-C8008N Sleep mode 1.1 Features1.1.1 General 1.1.2 HardwareMemory card slot 1.1.3 SoftwareTwo expansion slots for hardware interfaces Standard bidirectional parallel interfaceAccount Management System 1.1.4 NetworkingPDF417 two-dimensional bar codes KPDL3 Kyocera Printer Description Language1.2.1 Front 1.2 Parts and FunctionsThis tray receives printouts face down 1.2.2 Internal 10 Primary Transfer Unit 7 Waste Toner Box8 Fuser Unit 9 Paper Transfer Unit1.2.3 Rear 11 Quick Reference Guide Holder 1-109 Hard Disk Slot HDD 10 Exhaust DuctChapter 2 Handling Paper 2.1.1 Available paper types 2.1.2 Paper specifications2.1 General Table 2-1 Continued 2.1.3 Minimum and Maximum Paper Sizes2.1.4 Recommended Paper Paper composition 2.2 Selecting the Right Paper2.2.1 Guidelines Paper conditionsSmoothness 2.2.2 Paper propertiesBasis weights Paper Weight Equivalence TableGrain Moisture contentThickness Caliper Curl 2.2.3 Other properties of paperPorosity Stiffness2.3.1 Loading Paper into the Cassette 2.3 Loading Paperpaper size 2.3 Loading Paper 2.3.2 Loading Paper into the MP Multi-Purpose Traythe Operator Panel, section 3.10.2 Setting MP Tray Paper Size on page 2-102-11 2.4 Special Paper2.4.1 Selecting the Special Paper 2-12 TransparencyAdhesive-backed labels Value Postcards2-13 Recycled paper EnvelopesColored paper Pre-printed paperChapter 3 Using the Operator Panel Status Information 3.1 Understanding the Operator Panel3.1.1 Message Display Interface Indicator INTERFACE 3.1.2 Indicators in Message DisplayError codes See Chapter 4 TroubleshootingPaper Size Indicator SIZE READY, DATA, and ATTENTION Indicators Paper Type Indicator TYPEGO Key 3.1.3 KeysCANCEL Key ENTER Key MENU KeyArrow Keys Entering the Mode Selection Menu 3.2 Using the Menu Selection System3.2.1 Menu Selection System Cancelling Menu Selection Type AdjustPaper Weight Normal Setting a MenuMENU Key 3.2.2 Menu System Road Map3.2 Using the Menu Selection System 3-10Continued on the next page 3.2 Using the Menu Selection System3-11 ContinuedContinued on the next page 3.2 Using the Menu Selection System3-12 ContinuedContinued 3.2 Using the Menu Selection SystemDupEnablex Path 3-13Life Counters Others 3.2 Using the Menu Selection System3-14 Continued3-15 3.3 Menu Map and Status Pages3.3.1 Printing a Menu Map 3.3 Menu Map and Status Pages MENU MAPFS-C8008N Page Printer 3-16Status Page ? 3.3.2 Printing a Status PagePrint Status Page Print3-18 STATUS PAGEUnderstanding the Status Page 3-19 This item shows Standard memory in the printer 128 MB3-20 3.4 e-MPSJob Retention 3-21 3.4.1 Using Quick CopyJob Storage Virtual MailboxQuick Copy ?Harold Printing Additional Copies using Quick Copye-MPS Quick Copy HaroldPrinting Remaining Copies of a Proof and Hold Job 3.4.2 Using Proof-and-HoldSee Printing Additional Copies using Quick Copy on page Chapter Deleting a Quick Copy Job3-24 3.4.3 Printing a Private Print/Job RetentionReleasing a Private/Stored Job 3.4 e-MPS Deleting a Private/Stored Job3-25 3-26 Printing a Code JobBrowse through Windows Start Programs KYOCERA MITA KM-Net Job Manager3-27 PERMANENT CODE JOB LISTPrinting a List of Code Jobs Figure 3-5 below3-28 3.4.4 Retrieving Jobs from Virtual Mailbox VMBPrinting a List of VMB 3-29 VIRTUAL MAIL BOX LISTList of VMB List of VMB ?3-30 3.4.5 Changing e-MPS ConfigurationChanging the Maximum Number of Quick Copy/Proof-and-Hold Jobs 3-31 Maximum Space Assigned to Temporary Code JobsPerm. Code JOB Size 1550MB e-MPS Configuratione-MPS Perm. Code JOB Size 1550MBVMB Size e-MPS Configuratione-MPS VMB Size 1550MB3-34 3.5.1 Changing Parallel Interface Mode3.5 Changing the Interface Parameters 3-35 3.5.2 Changing Serial Interface ParametersNibble high Auto Normal High Speed Baud Rate ? 1200, 2400, 4800, 9600 Default, 19200, 38400, 57600None Default, Odd, Even, or Ignore Baud Rate Data Bits Stop Bits Parity None Protocol DTRpos.&XONPress the U or V key repeatedly until Network appears 3.5.3 Changing Network Interface Parameters3-37 3-38 press the U or V key to change from Off to On, and press the ENTER key3.5.4 Resolving IP Address Network Status Page Printing a Network Interface Status Page3.5 Changing the Interface Parameters Press the ENTER key againNETWORK STATUS PAGE 3-413-42 3.6 Making Default Settings3.6.1 Default Emulation Pen1 Width 3.6.2 KC-GL Pen Width and ColorKC-GL Pen Adjust ? Pen Emulation KC-GL3-44 3.6.3 Alternative Emulation for KPDL EmulationEmulation ?KPDL 3.6.4 Printing KPDL ErrorsEmulation PCL Emulation ?PCL?I000 3.6.5 Default FontFont Font Select Internal3-47 Courier ? RegularSelecting Regular or Dark Courier/Letter Gothic Size 012.00 points Changing the Default Font SizeFont Font Select InternalPitch FontFont Select Internal Pitch 10.00 cpiCode Set ?IBM PC-8 Setting the Code SetFont Code Set IBM PC-83-51 Printing Lists of FontsPRESCRIBE 3.6 Making Default Settings3-52 Internal Scalable and Bitmapped Fonts List3-53 3.7 Pagination3.7.1 Number of Copies Portrait Orientation 3.7.2 Print Orientation3-54 Page Protect ? On 3.7.3 Page Protect ModePage set Page Protect OnPress the U or V key repeatedly until Page Set appears 3.7.4 Linefeed LF Action3-56 CR Action ? CR only 3.7.5 Carriage-Return CR ActionPage Set CR Action CR only3-58 3.8 Setting Print Quality3.8.1 Tone Mode 3-59 3.8.2 Gloss ModeReading Font Data 3.9.1 Using the Memory Card3.9 Operating the Storage Device Memory Card on page A-73.9 Operating the Storage Device Reading Data3-61 Formatting a Memory Card on page Writing Data3-62 3-63 WRITE INFORMATIONDeleting Data Formatting of the memory card must be executed from the printer Formatting a Memory Card3-64 memory card3-65 FORMAT INFORMATIONPrinting a List of Data Names Partitions Device Name/Number PARTITION LISTDevice Information Partition Information 3-663-67 3.9.2 Using the Option Hard Disk3.9.3 Using the RAM Disk 3-68 Setting the RAM Disk Size3-69 3.10.1 MP Tray Mode3.10 Paper Handling 3-70 3.10.2 Setting MP Tray Paper Size3.10 Paper Handling 3-713-72 3.10.3 Setting the MP Tray Paper TypeHandling Paper 3-73 3.10.4 Setting the Cassette Paper TypeChapter 2 Handling Paper 3-74 3.10.5 Selecting the Paper Feed SourceMP tray Cassette Cassette Cassette Cassette Cassette Cassette 3-75 3.10.6 Duplex Printing FS-C8008DNBinding Modes 3-76 Long edge bindShort edge bind Note on Duplex Printing from the MP TrayOverride A4/LT ? Off 3.10.7 Overriding Difference between A4 and LetterPaper Handling Override A4/LT Off3-78 3.10.8 Creating Custom Paper TypesResetting the Custom Paper Type on page Step 1. Selecting the Custom Type PositionExtra Heavy Step 2. Selecting the Paper WeightStep 3. Selecting the Fuser Mode Heavy Thick3-80 3.10.9 Resetting the Custom Paper TypeEnabling or Disabling Duplex Printing for Custom Paper Type 3-81 3.10.10 Selecting the Output StackFace-down tray Face-up trayFace-down tray Sorter F-up Sorter 3.10.11 Selecting the Option Sorter ModeFace-down tray Stacker F-up Stacker F-down Face-down tray Finisher F-up Finisher F-down3-83 Sorter modeCollator mode Mailbox modeCollator Sorter Mode SorterSorter Mode ? Sorter3-85 3.11 Selecting Monochrome or Color PrintingColor Mode Color Color Mode ? Color3-86 3.12 Reading Life Counters3.12.1 Displaying the Total Printed Pages 3-87 3.12.2 Resetting the Toner CounterContainer Replacement on page 3-88 3.13 Other Modes3.13.1 Selecting the Message Language 3-89 3.13.2 Automatic Form Feed Timeout SettingEnglish Francais Deutsch Italiano Nederlands Espanol Portuglls Sleep Mode 3.13.3 Setting the Sleep TimerSleep Timer 030 min Sleep Mode3-91 Sleep Timer Timeout Time3-92 3.13.4 Received Data DumpCANCEL key 3-93 3.13.5 Printer ResettingPress the U or V key to select Permanent or Perm / Temp Permanent 3.13.6 Resource Protection3-94 Buzzer ? Off 3.13.7 Alarm Buzzer SettingOthers Buzzer Off3-96 3.13.8 Auto Continue SettingFor setting the auto continue recovery time, see the next section Timer 030sec 3.13.9 Setting the Auto Continue Recovery TimeAuto Continue Mode On Auto Continue Timer 030secDuplex Off 3.13.10 Duplex Printing Error Detection SettingFinishing Error OthersPrint Status Page 3.13.11 Printing the Service Status PageService OthersColor Calibration 3.13.12 Color CalibrationService OthersClearing Paper Jams Chapter 4 TroubleshootingGeneral Guidelines Print Quality Problems Error Messages 4.1.1 Tips 4.1 General Guidelines4.2 Print Quality Problems see Chapter 5 Maintenance, section 5.3.2 Cleaning Chapter 5 Maintenance, section 5.1 Toner Container Replacement on page see Chapter 5 Maintenance, section 5.3.2 Cleaningsee Chapter 5 Maintenance, section 5.3.2 Cleaning see Chapter 5 Maintenance, section 5.3.2 CleaningUsing the Operator Panel, section 3.13.12 Color Chapter 5 Maintenance, section 5.3.1 Cleaning the4.3 Error Messages on page Chapter 3 Using the Operator Panel, section Formatting a Memory CardMessage Corrective Action3-74 MessageCorrective Action 3-74Table 4-3 Continued 4.3 Error MessagesMessage Corrective ActionThe optional bulk stacker ST-30 tray is full. Remove paper sheets 4-10Message Corrective Action4-11 Storage Error Codes Hard Disk ErrorsMemory Card Errors RAM Disk Errors4-12 4.4 Clearing Paper Jams4.4.1 Possible Paper Jam Locations 4-13 4.4.2 General considerations for clearing jamsUtilizing Online Help Messages 4-14 4.4.3 Paper Jam - Right Cover #4.4.4 Paper Jam - Cassette # Remove the jammed paper on the MP tray up and towards the right 4.4.5 Paper Jam - MP TrayReset the sheets on the MP tray The paper jammed in the MP tray. Clear the jam in the MP tray4-16 4.4.6 Paper Jam - Duplexerpaper under the roller the duplexer drawer completelyOpen the front cover 4.4.7 Paper Jam - Paper Transfer Unit4-17 4.4 Clearing Paper Jams the covertransfer unit, remove the paper 4-184.4 Clearing Paper Jams green-colored lock leverOpen the fuser top cover. Remove the jammed paper 4-194-20 on the rear side while removing the paper4-21 primary transfer unit4-22 4.4.8 Paper Jam - Left Cover4-23 4.4.9 Paper Jam - Option Stacker/Finisher/SorterUnit on page Main Charger Unit Chapter 5 MaintenanceAlso, the following parts need periodic cleaning Paper Transfer Unit TK-800 C/M/Y/K Toner Kits Waste Toner BoxToner Kits 5.1 Toner Container Replacement5.1.1 Frequency of toner container replacement Starter Toner Containers5.1.2 Understanding Messages Requesting Toner Container Replacement 5.1.3 Replacing the Toner Container when it is properly seated 5.2 Replacing the Waste Toner Box place 5.3.1 Cleaning the Paper Transfer Unit 5.3 Cleaning the PrinterGrasp handle on the paper transfer unit and slowly pull it out Clean the registration roller metal using the cleaning cloth5.3 Cleaning the Printer 5-10 4 Clean the rubber belts black using the cleaning cloth5.3 Cleaning the Printer Push the paper transfer unit back in completely5-11 5.3 Cleaning the PrinterClose the front cover 5-12 5.3.2 Cleaning the Main Charger Unitthe grid cleaner out of the protective bag and remove the cap 5-13 The grid cleaner cannot be reused. Close the front coverAppendix A Options A.1 Options A.1 Optionsstandard IB-21E built-in standard Optional 2nd IB-20/22 Figure A-1A.2 Expansion Memory Modules Figure A-4 A.2.1 Installing the Memory ModulesPull out the main controller board gently Figure A-3and fasten it with screws Push down the two socket clamps to secure the memory modulesRemoving a Memory Module Testing the expanded memoryReading Font from the Memory Card A.3 General Description of OptionsA.3.1 Memory Card A.3.2 PF-30A Paper Feeder A.3.3 PD-800 Duplex Unit A-10 A.3.5 ST-30 Bulk StackerA-11 A.3.6 DF-31 Document FinisherA.3.7 CA-31 Casters and CA-31B Caster Kit A-12 A.3.8 Hard DiskDo not install the hard disk in the OPT lower slot disk installationA-13 A.3.9 IB-20/IB-21E/IB-22 Network Interface CardsUSB Interface Serial Interface Option Appendix B Computer InterfaceThis appendix explains the following topics Parallel Interface B.1.1 Communication Modes B.1 Parallel InterfaceB.1.2 Interface Signals Table B-2 SignalIn or DescriptionBasic specification B.2.1 SpecificationsB.2.2 Interface Signals B.2 USB InterfaceB.3.2 Interface voltage levels B.3.1 Interface SignalsB.3 Serial Interface Option H2 Number of data bits B.4 RS-232C ProtocolB.4.1 Parameters of the RS-232C Protocol H1 Baud rateH6 Buffer nearly-full threshold B.4.2 PRESCRIBE FRPO D0 CommandH4 Parity H5 Protocol logicB.5.1 Preparing an RS-232C Cable B.5.2 Connecting the Printer to the ComputerB.5 RS-232C Cable Connection B-10 3.5.2 Changing Serial Interface Parameters on pageDouble click on Communications Port Figure B-4 B-11Figure B-3 B.5 RS-232C Cable Connection In DOS, enter the following commandsTo test the interface, enter the following B-12The technical specification may be changed for improvement purpose Appendix C Technical Specificationscations on page Printer SpecificationSpecification See section C.2 Printing Speeds on page C-4Table C-1 Continued SpecificationPrint Speeds Printing SpeedsMode Paper SizeIndex-1 IndexIndex-2 Index-3 2002 by KYOCERA MITA CORPORATION All rights reserved. Revision 1.0 Kyocera Mita Corporation2-28, 1-Chome, Tamatsukuri Chuo-ku, Osaka, 540-8585 Japan