Xerox FS-C8008N KC-GL Pen Width and Color, Emulation KC-GL, KC-GL Pen Adjust ? Pen, Pen1 Width

3.6 Making Default Settings

3.6.2KC-GL Pen Width and Color

The KC-GL emulation mode enables you to set the pen widths in dots, individual pen colors for pen numbers 1 to 8, and the KC-GL page size.

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Emulation appears on the message display.

If the current emulation is other than KC-GL, press the ENTER key. A blinking question mark (?) appears.

Press the U or V key repeatedly until KC-GLappears. Press the ENTER key.

Emulation >

KC-GL

5	Press the Z key to move to the >KC-GL Pen Adjust> submenu. To change the
	pen width and/or pen color, press the ENTER key. A blinking question mark (?)

appears.

>KC-GL Pen

Adjust ? Pen (1)

6	Press the U or V key repeatedly until the desired pen number of 1 to 8 appears.
	When the desired pen number is displayed, press the ENTER key.
7	To change the pen width, press the Z key, then press the ENTER key. A blinking
	cursor appears at the width value.

>>Pen(1) Width

02 dot(s)

8	Press the U or V key repeatedly until the desired pen width in dots (00 to 99)
	appears. When the desired pen width is displayed, press the ENTER key.
9	To set the pen color, press the U or V key. To change the pen color, press the
	ENTER key. A blinking question mark (?) appears.

>>Pen(1) Color ? Black

10	Press the U or V key repeatedly until the desired pen color (Black, Red, Green,
	Yellow, Blue, Magenta, Cyan, White) appears. When the desired pen color is
	displayed, press the ENTER key.
11	To set the KC-GL page size, press the Y key twice, then Press the U or V key until
	>KC-GL Page Set is displayed.

3-43