Xerox FS-C8008DN, FS-C8008N manual Making Default Settings, Default Emulation, 3-42

3.6 Making Default Settings

3.6Making Default Settings

Using the operator panel, you can set the default for the following items. Note default settings made using the operator panel may be overridden by the printer driver settings and application software.

3.6.1Default Emulation

You can change the emulation mode and character code set for the current interface. The printer is capable of the following emulation modes:

•HP PCL 6 (HP Color LaserJet 8550)

•KC-GL (HPGL 7550A)

•KPDL3 (PostScript 3)

The printer can automatically switch between HP PCL 6 and KPDL3 depending on the print job that is received from the computer. To do this, select KPDL (AUTO) in the following procedure.

1	Press the MENU key.
2	Press the U or V key repeatedly until Emulation > appears on the message
	display. One of the emulation modes appears, indicating the emulation currently in
	use.
	PCL 6 (default)
	KC-GL
	KPDL
	KPDL (AUTO)
3	To change the default emulation, press the ENTER key. A blinking question mark
	(?) appears.

4

5

6

Emulation

?PCL 6

Press the U or V key repeatedly until the desired emulation mode is displayed.

Press the ENTER key.

Press the MENU key. The display returns to Ready.

3-42