Xerox FS-C8008DN, FS-C8008N manual Resource Protection, 3-94

3.13 Other Modes

3.13.6Resource Protection

By default, when you switch from the PCL 6 emulation to another, all downloaded fonts and macros will be lost. Resource protection preserves these PCL resources in memory so that they remain intact even when you have switched back in PCL 6.

	Resource protection requires extra memory to store the downloaded fonts and
	macros. The total size of the printer memory recommended for using the resource
Note	protection option is affected by several factors. See Appendix A Options.

By default, resource protection is deactivated. To activate resource protection, proceed as follows:

1

2

3

4

Press the MENU key.

Press the U or V key repeatedly until Others > appears.

Others >

Press the Z key.

Press the U or V key repeatedly until >Resource Prot. appears.

>Resouce Prot.

Off

5 Press the ENTER key. A blinking question mark (?) appears.

>Resouce Prot.

? Off

6	Press the U or V key to select Permanent or Perm / Temp (Permanent/
	Temporary) for resource protection.

7

8

When the desired resource protection is displayed, press the ENTER key.

To exit the menu selection, press the MENU key.

3-94