Xerox FS-C8008DN, FS-C8008N manual Removing a Memory Module, Testing the expanded memory

A.2 Expansion Memory Modules

Removing a Memory Module

To remove a memory module, remove the main controller board, then carefully push out the two socket clamps. Ease the memory module out of the socket to remove.

Testing the expanded memory

To verify that the memory modules are working properly, test them by printing a status page. To print a status page:

1	Make sure the printer is switched off. Plug in the printer power cord into an AC
	outlet and power on the printer.

2

3

4

Wait until the printer becomes Ready. When ready, press the MENU key.

Press the V key repeatedly until the message display shows Print Status Page.

Press the ENTER key twice. A status page is printed.

Check the Memory field in the upper right area. It shows information about the memory modules installed in memory slots 1 and 2. If you see an increase in the total memory size, the installation is successful. (Note that the printer is shipped with 128 MB of base memory.)

A-6