Xerox FS-C8008DN, FS-C8008N manual Operator Panel, .10.5 Selecting the Paper Feed Source on

4.3 Error Messages

Message Corrective Action

Insert the same memory card

You have inserted the wrong memory card when the Insert again mes- sage was displayed. Remove the wrong memory card from the printer’s memory card slot and insert the correct memory card. The printer again reads it from the beginning of the data.

Install MK [A]†

Replace Maintenance Kit A which is displayed on your printer message window. Replacement of the maintenance kit is necessary at every 600,000 images of printing and requires professional servicing. Contact your Kyo- cera Mita dealer.

Install MK			Replace Maintenance Kit B. Replacement of the maintenance kit B is nec-
[B]	†		essary at every 300,000 pages of printing and requires professional servic-
			ing. Contact your Kyocera Mita dealer.
			Replace Maintenance Kit C. Replacement of the maintenance kit C is nec-
Install MK
[C]	†		essary at every 300,000 images of printing and requires professional servic-
			ing. Contact your Kyocera Mita dealer.
			Current print processing cannot continue because of occurrence of KPDL
KPDL error ##
			error which is categorized by ##. To print out an error report, display >
Press GO
			Print KPDL err(s) from the menu system, and select On. Press the GO
			key to resume printing. You can abandon printing by the CANCEL key.
			If Auto Continue is set to On, printing will be automatically resumed after a
			preset period of time.
			The paper cassette matching the paper size and paper type of the print job is
Load Cassette #
( ) (		)††	empty. Load paper into the paper cassette as displayed in place of #. Press
A4 / PLAIN			the GO key to resume printing.
			If you want to print from a different paper source, press the V or U key to
			display Use alternative and you can change the source for paper
			feeding. After selecting a paper source and pressing the MENU key, Paper
			Handling > appears. By pressing the Ukey, the paper type settings menu
			appears. After setting the correct paper type, press the ENTER key and
			printing starts.
			If you want to print from a different paper source, see Chapter 3 Using the
			Operator Panel, section 3.10.5 Selecting the Paper Feed Source on page
			3-74.
			There is no paper cassette installed in the printer that matches the paper size
Load MP Tray
(A4)/(PLAIN)††			and paper type of the print job. Set paper in the MP tray. Press the GO key
			to resume printing. (Note that feeding the paper having a paper size which
			does not match the current paper size from the MP tray can cause paper jam.)
			If you want to print from a different paper source, press the V or U key to
			display Use alternative and you can change the source for paper
			feeding. After selecting a paper source and pressing the MENU key, Paper
			Handling > appears. By pressing the Ukey, the paper type settings menu
			appears. After setting the correct paper type, press the ENTER key and
			printing starts.
			If you want to print from a different paper source, see Chapter 3 Using the
			Operator Panel, section 3.10.5 Selecting the Paper Feed Source on page
			3-74.
			The memory card is accidentally removed from the printer’s memory card
Memory card err
			slot during reading. If you continue reading the memory card, insert the
Insert again
			same memory card into the slot again. The printer again reads it from the
			beginning of the data.
			Also see Insert the same memory card.
Table 4-3 (Continued)

4-8