Xerox FS-C8008DN, FS-C8008N manual 4-10, Message, Corrective Action, 3 Continued

4.3 Error Messages

Message Corrective Action

Sorter path error

The optional sorter (SO-30) is not installed properly. Correct the installa- tion.

Stacker paper full

The optional bulk stacker (ST-30) tray is full. Remove paper sheets.

Stacker path error

The optional bulk stacker (ST-30) is not installed properly. Correct the installation.

Toner low	Replace the toner container using a new toner kit. Color of the toner con-
	tainer that needs to be replaced is represented by C (Cyan), M (Magenta), Y
C,M,Y,K
	(Yellow), and K (Black).
	A device not supported by the printer is installed. Install an option unit sup-
Unsupported
	ported by the printer.
external device

Virtual mail box full

The storage area in the hard disk for the virtual mailboxes is full. Print out accumulated jobs in the virtual mailboxes.

Warning low memory

The printer’s internal memory is running low due to too many numbers of fonts and macros downloaded. Try deleting unnecessary fonts and macros.

Table 4-3 (Continued)

†These messages may be displayed altogether such as Install MK [A][B][C]. †† Messages separated by ‘( )/( )’ are displayed alternately.

††† After this error has happened, page protect mode will be automatically turned on. To maintain op- timum use of memory during printing, we recommend you manually turn off page protect mode. See Chapter 3 Using the Operator Panel, section 3.7.3 Page Protect Mode on page 3-55.

4-10