Making General Maintenance Settings
Use these instructions to set a number of maintenance items and to change the admin user’s name and password.
To make general maintenance settings, perform these steps:
1 | ¾ | Enable CentreWare Internet Services (see “Enabling Internet Services” on page |
2 | ¾ At the CentreWare Internet Services Home Page for the WorkCentre PE120i, select the | |
| [Maintenance] tab. | |
Enter your [Admin User Name] and [Password].
3 | ¾ | In the Maintenance frame, select [Maintenance]. |
4 | ¾ In the Maintenance area: | |
| Enter the [Service Number] to telephone to obtain service or advice. | |
Choose the required USB Mode, UI Language, Power Save time and Clock Mode from the
Click the [Print] button to print an [Internal Cleaning Sheet].
¾To change the Admin User Password, in the Change Admin User Name and Password
5 area:
Enter the [New User Name] and [Old User Name].
Enter the [New User Password] and [Old User Password].
6 | ¾ Click the [Apply] button to implement any changes. | |
|
|
|
NOTE: Click the [Undo] button to cancel any changes made and return to the previous values.
Administration Tools
7 | ¾ Select the [Status] tab and then select [Reset Network Controller] to enable the |
selection to take effect. |
Xerox WorkCentre PE120i System Administration Guide | Page |
